Profile picture for user khelladi
Statut
Professeur des universités
Bureau
B3-RC
Télephone
01 44 24 63 91
Date d'arrivée
Titres, responsabilités
Directeur du laboratoire, co-animateur du thème "Turbomachines"
Animateur plateforme

Adresse : 151 boulevard de l'Hôpital, 75013 Paris, France    
Email : sofiane.khelladi@ensam.eu


Publications

  1. M. Deligant, C. Romero, X. Nogueira, L. Ramirez, M. Specklin, F. Bakir, S. Khelladi, "Very high order finite volume solver for multi component two-phase flow with phase change using a posteriori Multi-dimensional Optimal Order Detection", Computers and Fluids, accepted for publication in 2024
  2. A. Benbeghila, R. Ouzani, A. Benderradji, Ch. Abid, S. Khelladi, Investigation of Asymmetric Heating in Poiseuille-Rayleigh-Bénard Water Flow: A Numerical Study, International Communications in Heat and Mass Transfer, vol. 160, 2025, https://doi.org/10.1016/j.icheatmasstransfer.2024.108404

  3. A. Benbeghila, R. Ouzani, A. Benderradji, Z. Alloui, S. Khelladi, "Linear stability of Rayleigh-Bénard-Poiseuille flow of water near 4°C in a channel bounded by slip walls", International Communications in Heat and Mass Transfer, vol. 160, 2025, https://doi.org/10.1016/j.icheatmasstransfer.2024.108370..

  4. M. Mama, E. Solaï, T. Capurso, A. Danlos, S. Khelladi, "Comprehensive review of multi-scale Lithium-ion batteries modeling: from electro-chemical dynamics up to heat transfer in battery thermal management system", Energy Conversion and Management, , accepted for publication in 2024

  5. T. Ait-Ali, S. Khelladi, F. Bakir, N. Hannoun, X. Nogueira, L. Ramirez, "A Diffuse Interface Model for Cavitation Taking into Account Capillary Forces", International Journal for Numerical Methods in Fluids, 2024, https://doi.org/10.1002/fld.5350

  6. R. Ouzani, S. Khelladi, X. Nogueira, "High thermal Rayleigh number with double-diffusive finger convection: Effect of nonlinear equation of state", International Communications in Heat and Mass Transfer, accepted for publication in 2024.

  7. M.N. Hamlaoui, A. Bouhelal, A. Smaili, S. Khelladi, H. Fellouah, "An inverse CFD actuator disk method for aerodynamic design and performance optimization of Horizontal Axis Wind Turbine blades", Energy Conversion and Management, Volume 316, 2024, 118818,  https://doi.org/10.1016/j.enconman.2024.118818

  8. J.-H. Beaux, J. Girardeau, S. Khelladi, M. Deligant, Ch. Perilhon, "Numerical Investigations of Flows and Heat Transfer in Turbine Disc Cavities", ASME - Journal of Engineering for Gas Turbines and Power, 2024, 146(10): 101016, https://doi.org/10.1115/1.4065632

  9. L. Ramírez, J.     Fernández-Fidalgo, J. París, M. Deligant, S. Khelladi, X.     Nogueira. A very fast high-order flux reconstruction for Finite     Volume schemes for Computational Aeroacoustics. Engineering with     Computers, 2024, https://doi.org/10.1007/s00366-024-02039-2

  10. A. Kouadri, E. Douroum, A.R. El Ouederni, A. Benazza, S. Laouedj, S. Khelladi, "Assessment of mixing behaviors of non-Newtonian pseudoplastic fluids in short microdevices", International Communications in Heat and Mass Transfer, Vol. 155, 2024, https://doi.org/10.1016/j.icheatmasstransfer.2024.107500

  11. M. Zarbini Seydani, A. Krimi, S. Khelladi, M. Bedel, M. El Mansori, "3D numerical simulation and experimental validation of resin-bonded sand gravity casting: Filling, cooling, and solidification with SPH and ProCAST approaches", Thermal Science and Engineering Progress, Vol. 47, 2024, https://doi.org/10.1016/j.tsep.2023.102329.

  12. H.R. Vanaei, S. Khelladi, I. Dobrev, F. Bakir, R.M. Himeur, A. Mammeri, K. Azzouz, "Performance and Efficiency of Cross-Flow Fans - A Review", Energies 2023, 1, 0. https://doi.org/10.3390/en1010000

  13. M. Zarbini Seydani, A. Krimi, M. Bedel, S. Khelladi, M. El Mansori, "A 2D filling and solidification benchmark test: validating smoothed particle hydrodynamics (SPH) simulations for sand gravity casting" Int J Adv Manuf Technol (2023). https://doi.org/10.1007/s00170-023-11892-2

  14. Ch. B. Abed, V.-T. Nguyen, S. Khelladi, M. Deligant, A. Danlos, F. Bakir, "A Novel Experimental Control Method to Suppress Instability in a Centrifugal Compressor with two Counter and Co-rotating Rotors", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2023, https://doi.org/10.1177/09576509231181547

  15. B. Manser, S. Khelladi, M. Deligant, H. Ragueb, I. Belaidi, F. Bakir, "Performance of hydrodynamic textured journal bearing with the combined influence of elastic deformation and pseudo-plastic lubricant", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2023;0(0). doi:10.1177/13506501231179526

  16. R. Ouzani, S. Khelladi, "Numerical study of salt fingers dynamics : effects of the density inversion", Thermal Science and Engineering Progress , Volume 40, 2023, 101770, https://doi.org/10.1016/j.tsep.2023.101770.

  17. F. Zohra, A. Fourar, O. Khanfouf, S. Khelladi, F. Massouh, A. Zeroual,  "Experimental study and numerical simulation of fluvial dynamics and sediment transport in instationary flow conditions",  Model. Earth Syst. Environ. (2023). https://doi.org/10.1007/s40808-023-01722-5

  18. O. Khanfouf, F. Z. Fourar, A. Fourar, F. Massouh, R. Chiremsel, A. Zeroual, S. Khelladi, "Infuence of model selection on the temperature field and turbulent energy dissipation rate in a hydraulic system with a complex geometry", Modeling Earth Systems and Environment,  https://doi.org/10.1007/s40808-022-01591-4, 2022

  19. H.R. Vanaei, S. Khelladi, A. Tcharkhtchi, "Roadmap: Numerical - Experimental Investigation and Optimization of 3D-printed Parts using Response Surface Methodology", Materials, 15, 7193. https://doi.org/10.3390/ma1520719, 2022

  20. R. M. Himeur, S. Khelladi, M. A. Ait Chikh, H. R. Vanaei, I. Belaidi, F. Bakir, "Toward an accurate aerodynamic performance analysis methodology of cross-flow fans", Energies, 15, 5134. https://doi.org/10.3390/en15145134, 2022  

  21. A. Megdoud, B. Manser, I. Belaidi, F. Bakir, S. Khelladi, "A reduced-order method with PGD for the analysis of dynamically loaded journal bearing", Comptes Rendus Mécanique, Tome 350, pp. 361-390. doi : 10.5802/crmeca.124, 2022

  22. M. Deligant, M. Pereira, T-M. Laleg Kirati, F.Bakir, S. Khelladi, "Toward a detection approach of surge precursors using a semi-classical signal analysis method",  The European Physical Journal Plus, 137, 727, https://doi.org/10.1140/epjp/s13360-022-02923-0, 2022

  23. E. Douroum, A. Kouadri, A. Tahiri, M. Brihmat, S. Khelladi, "Hydrodynamic and kinematic study to analyse the mixing efficiency of short passive micromixers", Industrial & Engineering Chemistry Research,  https://doi.org/10.1021/acs.iecr.2c00084, 2022.

  24. H.R. Vanaei, S. Khelladi, M. Deligant, M. Shirinbayan, A. Tcharkhtchi, "Numerical prediction for temperature profile of parts manufactured using fused filament fabrication", Journal of Manufacturing Processes, Volume 76, pp. 548-558, https://doi.org/10.1016/j.jmapro.2022.02.042, 2022.

  25. R. Ouzani, Z. Alloui, S. Khelladi, M. Specklin, "Dynamics of fingering convection: a numerical study", Environmental Fluid Mechanics, DOI: http://dx.doi.org/10.1007/s10652-022-09838-5, 2022

  26. P. Tomov, L. Pora, R. Paridaens, T. Magne, M. Kebdani, S. Khelladi, F. Bakir, "Study of the Hydraulic Performances of Two Inducers in Water—CO2 Mixture—Toward Performance Improvement With Suppression of Prerotation." ASME. J. Fluids Eng., 144(4): 041203. https://doi.org/10.1115/1.4052951, 2022

  27. M. N. Hamlaoui, A. Smaili, I. Dobrev, M. Pereira, H. Fellouah, S. Khelladi, "Numerical and Experimental Investigations of HAWT Near Wake Predictions using Particle Image Velocimetry and Actuator Disk Method", Energy, Volume 238, Part B, 121660, https://doi.org/10.1016/j.energy.2021.121660, 2022

  28. V.-T. Nguyen, Ch. B. Abed, A. Danlos, F. Ravelet, R. Paridaens, M. Deligant, S. Khelladi, F. Bakir, "Experimental study of a novel centrifugal compressor with two successive and independent rotors", ASME. J. Eng. Gas Turbines Power; 144(1): 011005. https://doi.org/10.1115/1.4052506, 2022

  29. V.T. Nguyen, A. Danlos, F. Ravelet, M. Deligant, M. Solis, S. Khelladi, F. Bakir,  Numerical Analysis of a Novel Twin-Impeller Centrifugal Compressor. Computation 2021, 9, 143. https://doi.org/10.3390/computation9120143

  30. H.R. Vanaei, M. Shirinbayan, M. Deligant, S. Khelladi, A. Tcharkhtchi, "In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication: A Journey from Numerical to Experimental Approaches", Thermo, Vol1, pp 332–360. https://doi.org/10.3390/thermo1030021, 2021 (Top cited)

  31. M. N. Hamlaoui, A. Smaili, I. Dobrev, M. Pereira, H. Fellouah, S. Khelladi, "Numerical and Experimental Investigations of HAWT Near Wake Predictions using Particle Image Velocimetry and Actuator Disk Method", Energy, https://doi.org/10.1016/j.energy.2021.121660, 2021

  32. Ch.B. Abed, S. Khelladi, M. Deligant, A. El Marjani, M. Solis, F. Bakir, "Experimental Validation of the Aerodynamic Performance of an Innovative Counter-rotating Centrifugal Compressor", Energies, 14, 2582, https://doi.org/10.3390/en14092582, 2021

  33. A. Kouadri, E. Douroum, Y. Lasbet, T.T. Naas, S. Khelladi, M. Makhlouf, "Comparative study of mixing behaviors using non-Newtonian fluid flows in passive micromixers", International Journal of Mechanical Sciences, Volume 201, 2021, 106472 (https://doi.org/10.1016/j.ijmecsci.2021.106472)
  34. E. Douroum, S. Laouedj, A. Kouadri, T.T. Naas, S. Khelladi, A. Benazza, "High hydrodynamic and thermal mixing performances of efficient chaotic micromixers: a comparative study", Chemical Engineering and Processing - Process Intensification, 2021, 108394, https://doi.org/10.1016/j.cep.2021.108394.

  35. L. Bourabia, C.B. Abed, M. Cerdoun, S. Khalfallah, M. Deligant, S. Khelladi, T. Chettibi, "Aerodynamic preliminary design optimization of a centrifugal compressor turbocharger based on a one-dimensional mean-line model", Engineering Computations, Vol. 38 No. 9, pp. 3438-3469. https://doi.org/10.1108/EC-09-2020-0508, 2021

  36. H.R. Vanaei, M. Shirinbayan, S. Vanaei, J. Fitoussi, S. Khelladi, A. Tcharkhtchi, "Multi-scale Damage Analysis and Fatigue Behavior of PLA Manufactured by Fused Deposition Modeling (FDM)", Rapid Prototyping Journal, https://doi.org/10.1108/RPJ-11-2019-0300, 2021.

  37. R. Ouzani, M. Si-Ameur, S. Khelladi, A. Danlos, “Mixing in turbulent compressible heated coaxial jets: A numerical study", International Journal of Hydrogen Energy, Vol. 45, Issue 33, pp. 16816-16837, https://doi.org/10.1016/j.ijhydene.2020.01.194, 2020

  38. A. Boumehani, B. Noura, R. Kerfah, S. Khelladi, I. Dobrev, “Numerical Investigation of the Blade Profile Effect on the Aerodynamic Performance of a Vertical-Axis Wind Turbine Darrieus H-Rotor”, Journal of Thermal Engineering 6(6):388-402, 10.18186/thermal.833673, 2020

  39. F. Ravelet, A. Danlos, F. Bakir, K. Croci, S. Khelladi, Ch. Sarraf, "Development of Attached Cavitation at Very Low Reynolds Numbers from Partial to Super-Cavitation", Applied Science, 10(20), 7350; https://doi.org/10.3390/app10207350, 2020

  40. A. Krimi, L. Ramírez; Khelladi, S., F. Navarrina, M. Deligant, X. Nogueira, "Improved δ-SPH Scheme with Automatic and Adaptive Numerical Dissipation". Water, 12, 2858, https://doi.org/10.3390/w12102858, 2020

  41. H.R. Vanaei, M. Deligant, M. Shirinbayan, K. Raissi, J. Fitoussi, S. Khelladi, A. Tcharkhtchi, "A comparative in-process monitoring of temperature profile in fused filament fabrication", Polymer Engineering and Science,  https://doi.org/10.1002/pen.25555, 2020
  42. T.T. Naas, A. Kouadri, S. Khelladi, L. Laib: "Thermal mixing performances of shear-thinning non-Newtonian fluids inside Two-Layer Crossing Channels Micromixer using entropy generation method: Comparative study", Chemical Engineering and Processing - Process Intensification, 108096, https://doi.org/10.1016/j.cep.2020.108096, 2020
  43. M. Théodore,  R. Parideans,  S. Khelladi,  F. Bakir,  P. Tomov,  L. Pora: "Experimental Study of the Hydraulic Performances of Two Three-Bladed Inducers in Water, Water with Dissolved CO2 and Jet Fuel." ASME. J. Fluids Eng. doi: https://doi.org/10.1115/1.4048143, 2020
  44. H. Vanaei, K. Raissi, M. Deligant, M. Shirinbayan, J. Fitoussi, S. Khelladi, A. Tchatkhtchi: "Towards the Understanding of Temperature Effect on Bonding Strength, Dimensions and Geometry of 3D-printed Parts", Journal of Materials Science, 55pages14677-14689, 2020    
  45. H. Vanaei, M. Shirinbayan, S.F. Costa, F.M. Duarte, J.A. Covas, M. Deligant, S. Khelladi, A. Tcharkhtchi: "Experimental study of PLA Thermal Behavior during Fused Filament Fabrication (FFF)", Journal of Applied Polymer Science, https://doi.org/10.1002/app.49747, 2020    
  46. Ch. Foulquié, S. Khelladi, M. Deligant, L. Ramirez, X. Nogueira, J. Mardjono: "Numerical Assessment of Fan Blades Screen Effect onFan/OGV Interaction Tonal Noise", Journal of Sound and Vibration, Vol. 481, 115428, 2020    
  47. H. Vanaei, M. Deligant, K. Raissi, S. Khelladi, A. Tcharkhtchi: "Influence of process parameters on thermal and mechanical properties of PLA fabricated by Fused Filament Fabrication", Polymer Engineering and Science, https://doi.org/10.1002/pen.25419, 2020
  48. A. Kouadri, M. Douroum, S. Khelladi: "Parametric study of the crossing elongation effect on the mixing performances using short Two-Layer Crossing Channels Micromixer (TLCCM) geometry", Chemical Engineering Research and Design, Vol. 158, June 2020, pp. 33-43, 2020.
  49. T. Magne, R. Paridaens, F. Ravelet, S. Khelladi, F. Bakir, P. Tomov, L. Pora : "Effect of Gas Content on the Cavitating and Non-Cavitating Performance of an Axial Three-Bladed Inducer", Multiphase Science and Technology, DOI: 10.1615/MultScienTechn.2020031533, 2020
  50. Nogueira X., Ramirez L., Fernández-Fidalgo J., Deligant M., Khelladi S., Chassaing J.-C., Navarrina F. : "An a posteriori-implicit turbulent model with automatic dissipation adjustment for Large Eddy Simulation of compressible flows", Computers and Fluids, Vol.197, 104371, 2020
  51. A. Martínez, L. Ramirez, X. Nogueira, S. Khelladi, F. Navarrina : "A high-order finite volume method with improved isotherms reconstruction for the computation of multiphase flows using the Navier-Stokes-Korteweg equations", Computers & Mathematics with Applications, Volume 79, Issue 3, pp. 673-696, 2020
  52. B. Mancer, I. Belaidi, S. Khelladi, M. A. Ait Chikh, M. Deligant, F. Bakir : "Computational investigation on the performance of hydrodynamic micro-textured journal bearing lubricated with micropolar fluid using mass-conserving numerical approach", Journal of Engineering Tribology, DOI:10.1177/1350650119894167, 2019
  53. B. Mancer, I. Belaidi, A. Hamrani S. Khelladi, F. Bakir, "Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach", Tribology - Materials Surfaces & Interfaces, Volume 14, 2020 - Issue 1, pp. 33-50, 2019
  54. M. A. Ait Chikh, I. Belaidi, S. Khelladi, A. Hamrani, M. Deligant, F. Bakir: Coupling of inverse method and cuckoo search algorithm for multi-objective optimization design of an axial flow pump, Journal of Power and Energy, 233(8), pp. 988-1006. https://doi.org/10.1177/0957650919844112, 2019
  55. B. Manser, I. Belaidi, A. Hamrani, S. Khelladi, F. Bakir: Performance of hydrodynamic journal bearing under the combined influence of textured surface and journal misalignment: A numerical survey. Comptes Rendus Mecanique, Vol. 347, Issue 2, pp. 141-165, 2019 (DOI:10.1016/j.crme.2018.11.002)
  56. S. Aid, A. Eddhahak, S. Khelladi, Z. Ortega, S. Chaabani, A. Tcharkhtchi: On the miscibility of PVDF/PMMA polymer blends: Thermodynamics, experimental and numerical investigations. Polymer Testing, Vol. 73, pp. 222-231, 2019 (DOI:10.1016/j.polymertesting.2018.11.036)
  57. A. Sanitas, M. Bedel, S. Khelladi, M. El Mansori: Mastering of the Filling Stage in Low Pressure Sand Casting Process. Materials Science Forum, Vol. 941, pp. 2306-2312, 2018 (DOI:10.4028/www.scientific.net/MSF.941.2306)
  58. S.T.W. Kuruneru, E. Marechal, M. Deligant, E. Sauret, S. Khelladi, F. Ravelet, S. Chandra Saha, Y. T. Gu:A Comparative Study of Mixed Resolved–Unresolved CFD-DEM and Unresolved CFD-DEM Methods for the Solution of Particle-Laden Liquid Flows. Archives of Computational Methods in Engineering, pp. 1-16, 2018 (DOI:10.1007/s11831-018-9282-3)
  59. A. Krimi, S. Khelladi, X. Nogueira, M. Deligant, R. Ata, M. Rezoug:Multiphase Smoothed Particle Hydrodynamics approach for modeling Soil-Water interactions. Advances in Water Resources, Vol. 121, pp. 189-205, 2018 (DOI:10.1016/j.advwatres.2018.08.004)
  60. L. Ramirez, X. Nogueira, S. Khelladi, A. Krimi, I. Colominas:A very accurate Arbitrary Lagrangian-Eulerian meshless method for Computational Aeroacoustics. Computer Methods in Applied Mechanics and Engineering , Vol. 342, pp 116-141, 2018 (DOI:10.1016/j.cma.2018.07.036)
  61. A. Krimi, M. Rezoug, S. Khelladi, X. Nogueira, M. Deligant, L. Ramírez:Smoothed Particle Hydrodynamics : A consistent model for interfacial multiphase fluid flow simulations. Journal of Computational Physics, Vol. 358, pp. 53-87, 2018 (DOI:10.1016/j.jcp.2017.12.006)
  62. M. Ait-Chikh, I. Belaidi, S. Khelladi, J. Paris, M. Deligant, F. Bakir:Efficiency of Bio- and Socio-inspired Optimization Algorithms for Axial Turbomachinery Design. Applied Soft Computing, Vol. 64, pp. 282-306, 2018 (DOI:10.1016/j.asoc.2017.11.048)
  63. L. Ramírez, X. Nogueira, P. Ouro, · F. Navarrina, S. Khelladi, I. Colominas:A Higher-Order Chimera Method for Finite Volume Schemes. Archives of Computational Methods in Engineering,  Vol. 25, Issue 3, pp 691–706, 2018 (DOI:10.1007/s11831-017-9213-8)
  64. T. Azzam, R. Paridaens, F. Ravelet, S. Khelladi, H. Oualli, F. Bakir:Experimental investigation of an actively controlled automotive cooling fan using steady air injection in the leakage gap. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, Vol. 231(1), pp. 59-67, 2017 (DOI:10.1177/0957650916688120)
  65. B. Noura, I. Dobrev, S. Khelladi, F. Massouh:3D unsteady flow analysis around a rotor blade of horizontal axis wind turbine-Rutland 503, International Journal of Energy and Statistics, Vol. 04, No. 03, 1650013, 2016 (DOI:10.1142/S2335680416500137)
  66. B. Cherabi, A. Hamrani, I. Belaidi, S. Khelladi, F. Bakir:An efficient reduced-order method with PGD for solving journal bearing hydrodynamic lubrication problems, Vol. 344, Issue 10, pp. 689–714, 2016 (DOI:10.1016/j.crme.2016.05.006)
  67. B. Noura, I. Dobrev, R. Kerfah, F. Massouh, S. Khelladi:Investigation of the Rotor Wake of Horizontal Axis Wind Turbine under Yawed Condition. Journal of Applied Fluid Mechanics, Vol. 9, No. 6, pp. 2695-2705, 2016 (http://jafmonline.net/JournalArchive/download?file_ID=41372&issue_ID=237)
  68. S. Zouaoui, H. Djebouri, K. Mohammedi, S. Khelladi, A. Ait Aider:Experimental study on the effects of big particles physical characteristics on the hydraulic transport inside a horizontal pipe. Chinese Journal of Chemical Engineering, Vol. 24, Issue 2, pp. 317–322, 2016 (DOI:10.1016/j.cjche.2015.12.007)
  69. X. Nogueira, L. Ramirez, S. Khelladi, J.-C. Chassaing, I. Colominas:A high-order density-based finite volume method for the computation of all-speed flows. Computer Methods in Applied Mechanics and Engineering, vol. 298, pp 229–251, 2016 (DOI:10.1016/j.cma.2015.10.004)
  70. A. Hamidi, S. Farzaneh, F. Nony, Z. Ortega, S. Khelladi, M. Monzon, F. Bakir, A. Tcharkhtchi:Modelling of sintering during rotational moulding of the thermoplastic polymers. International Journal of Material Forming Vol. 9, Issue 4, pp 519–530, 2016 (DOI:10.1007/s12289-015-1239-6)
  71. P. Tomov, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir, P. Vertenoeuil:Experimental study of aerated cavitation in a horizontal venturi nozzle. Experimental Thermal and Fluid Science, Vol. 70, pp 85–95, 2016
  72. A. Hamidi, S. Khelladi, L. Illoul, M. Shirinbayan, F. Bakir, A. Tcharkhtchi:Implementation of Surface Tension force in Fluid Flow during Reactive Rotational Molding. International Journal of Material Forming, Vol. 9, Issue 2, pp 131–148, 2016 (DOI:10.1016/j.compfluid.2015.06.019)
  73. P. Tomov, A. Danlos, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir:POD study of aerated cavitation in a venturi nozzle. Journal of Physics Conference Series Vol. 656(1):012171, 2015 (DOI:10.1016/j.expthermflusci.2015.08.018)
  74. A. Hamidi, S. Khelladi, L. Illoul, M. Shirinbayan, F. Bakir, A. Tcharkhtchi:Modelling Surface Tension with Smoothed Particle Hydrodynamics in Reactive Rotational Moulding. Computers & Fluids, vol. 118, pp 191–203, 2015 (DOI:10.1016/j.compfluid.2015.06.019)
  75. L. Ramirez, C. Foulquié, X. Nogueira, S. Khelladi, J.-C. Chassaing, I. Colominas:New High-Resolution-Preserving Sliding mesh Techniques for Higher-order Finite Volume Schemes. Computers & Fluids, vol. 118, pp. 114–130, 2015 (DOI:10.1016/j.compfluid.2015.06.008)
  76. M. Deligant, M. Specklin, S. Khelladi:A Naturally Anti-Diffusive Compressible Two-Phase Kapila Model with Boundedness Preservation Coupled to a High Order Finite Volume Solver. Computers & Fluids, Vol. 114, Pages 265–273, 2015 (DOI:10.1016/j.compfluid.2015.03.004)
  77. R. Campos–Amezcua, F. Bakir, A. Campos–Amezcua, S. Khelladi, M. Palacios, R. Rey:Numerical analysis of unsteady cavitating flow in an axial inducer. Applied Thermal Engineering, Vol. 75, pp. 1302-1310, 2015 (online since 2014) (DOI:10.1016/j.applthermaleng.2014.07.063)
  78. L. Ramírez, X. Nogueira, S. Khelladi, J.-C. Chassaing, I. Colominas:A new higher-order finite volume method based on Moving Least Squares for the resolution of the incompressible Navier–Stokes equations on unstructured grids. Computer Methods in Applied Mechanics and Engineering, vol. 278, pp. 883–901, 2014 (DOI:10.1016/j.cma.2014.06.028)
  79. S. Rivière, S. Khelladi, S. Farzaneh, F. Bakir, A. Tcharkhtchi:Simulation of Polymer Flow Using Smoothed Particle Hydrodynamics Method. Polymer Engineering and Science, vol. 52 (12), pp. 2509-2518, 2013 (DOI:10.1002/pen.23512)
  80. R. Ata, S. Pavan, S. Khelladi, E. F. Toro:A Weighted Average Flux (WAF) scheme applied to shallow water equations for real-life applications. Advances in Water Resources, Vol. 62, Part A, pp. 155–172, 2013 (DOI:10.1016/j.advwatres.2013.09.019)
  81. R. Campos–Amezcua, S. Khelladi, Z. Mazur-Czerwiec, F. Bakir, A. Campos-Amezcua, R. Rey:Numerical and experimental study of cavitating flow through an axial inducer considering tip clearance. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, Vol. 227 (8), pp. 858-868, 2013 (DOI:10.1177/0957650913497357)
  82. A. Zaaraoui, F. Ravelet, F. Margnat, S. Khelladi:High Accuracy Volume Flow Rate Measurement Using Vortex Counting. Flow Measurement and Instrumentation, Vol. 33, pp. 138–144, 2013 (DOI:10.1016/j.flowmeasinst.2013.06.002)
  83. E. Tannoury, S. Khelladi, B. Demory, M. Henner, F. Bakir:Influence of blade compactness and segmentation strategy on tonal noise prediction of an automotive engine cooling fan. Applied Acoustics, Vol. 74, Issue 5, pp. 782-787, 2013 (DOI:10.1016/j.apacoust.2012.11.015)
  84. F. Ravelet, F. Bakir, S. Khelladi, R. Rey:Experimental study of hydraulic transport of large particles in horizontal pipes. Experimental Thermal and Fluid Science, Vol. 45, pp. 187-197, 2013 (DOI:10.1016/j.expthermflusci.2012.11.003)
  85. J.-C. Chassaing, S. Khelladi, X. Nogueira:Accuracy assessment of a high-order moving least squares finite volume method for compressible flows. Computers & Fluids, vol. 71, pp. 41-53, 2013 (DOI:10.1016/j.compfluid.2012.09.021)
  86. B. Noura, S. Khelladi, R. Dizene, F. Bakir:Numerical Simulation of Surface Roughness Effects on Dynamic Stall of Wind Turbine Blade. Journal of Power and Energy Systems, Vol.7, Issue 1, pp. 32-48, 2013 (DOI:10.1299/jpes.7.32)
  87. J.-C. Chassaing, X. Nogueira, S. Khelladi:Moving Kriging reconstruction for high order finite volume computations of compressible Flows. Computer Methods in Applied Mechanics and Engineering, vol. 253, pp. 463-478, 2013 (DOI:10.1016/j.cma.2012.08.016)
  88. M. Asgarpour, F. Bakir, S. Khelladi, A. Khavandi, A. Tcharkhtchi:3D Model for Powder Compact Densification in Rotational Molding. Polymer Engineering and Science, vol. 52/9, pp. 2033-2040, 2012 (DOI:10.1002/pen.23133)
  89. B. Noura, I. Dobrev, R. Dizene, F. Massouh, S. Khelladi:Experimental study of yawed inflow around wind turbine rotor. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, vol. 226/5, pp. 664-673, 2012 (DOI:10.1177/0957650912445015)
  90. E. Tannoury, S. Khelladi, B. Demory, M. Henner, F. Bakir:Tonal Noise Prediction of an Automotive Engine Cooling Fan: Comparison between Analytical Models and Acoustic Analogy Results, Journal of Mechanics Engineering and Automation, Vol. 2, pp. 455-463, 2012 (DOI:10.17265/2159-5275/2012.07.007)
  91. B. Noura, R. Dizène, S. Khelladi:A Numerical Simulation of Turbulence Flow around a Blade Profile of HAWT Rotor in Moving Pulse. Journal of Applied Fluid Mechanics, vol. 5/1, pp. 1-9, 2012 (http://jafmonline.net/JournalArchive/download?file_ID=15324&issue_ID=207)
  92. X. Nogueira, S. Khelladi, I. Colominas, L. Cueto-Felgueroso, José París, Héctor Gómez:High-Resolution Finite Volume Methods on Unstructured Grids for Turbulence and Aeroacoustics. Archives of Computational Methods in Engineering, vol. 18/3, pp 315-340, 2011 (DOI:10.1007/s11831-011-9062-9)
  93. S. Khelladi, X. Nogueira, I. Colominas, F. Bakir:Toward a Higher Order Unsteady Finite Volume Solver Based on Reproducing Kernel Methods. Computer Methods in Applied Mechanics and Engineering, vol. 200, pp. 2348-2362, 2011 (DOI:10.1016/j.cma.2011.04.001)
  94. M. Asgarpour, F. Bakir, S. Khelladi, A. Khavandi, A. Tcharkhtchi:Characterization and Modeling of Sintering of Polymer Particles. Journal of Applied Polymer Science, vol. 119/5, pp. 2784-2792, 2011 (online since 2010) (DOI:10.1002/app.32924)
  95. M. Solis, F. Bakir, S. Khelladi, R. Noguera:Numerical Study on Pressure Fluctuations Reduction in Centrifugal Pumps : Infuence of Radial Gap and Splitter Blades. ISRN Mechanical Engineering, vol 2011, Article ID 479594, 14 pp., 2011 (DOI:10.5402/2011/479594)
  96. X. Nogueira, I. Colominas, L. Cueto-Felgueroso, S. Khelladi, F. Navarrina, M. Casteleiro:Resolution of computational aeroacoustics problems on unstructured grids with a higher-order finite volume scheme. Journal of Computational and Applied Mathematics, vol. 234/7, pp.2089-2097, 2010 (online since 2009) ( DOI:10.1016/j.cam.2009.08.067)
  97. S. Khelladi, Ch. Sarraf, F. Bakir, R. Rey:Study of a High Rotational Speed Shrouded Centrifugal Fan : Aerodynamics and Effects of shroud associated cavity on the Performance. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, Vol. 224/5, pp. 691-700, 2010 (online since 2009) (DOI:10.1243/09576509JPE899)
  98. X. Nogueira, S. Khelladi, L. Cueto-Felgueroso, F. Bakir, I. Colominas, Héctor Gómez:Implicit Large-Eddy Simulation with a Moving Least Squares-based finite volume method. IOP Conference Series Materials Science and Engineering, vol. 10/ 012235, 2010 (DOI:10.1088/1757-899X/10/1/012235)
  99. S. Khelladi, F. Bakir:A Consistency Test of Thickness and Loading Noise Codes Using Ffowcs Williams and Hawkings Equation. Advances in Acoustics and Vibration, vol. 2010, Article ID 174361, 6 pp., 2010 (DOI:10.1155/2010/174361)
  100. X. Nogueira, I. Colominas, L. Cueto-Felgueroso, S. Khelladi:On the simulation of wave propagation with a higher-order finite volume scheme based on Reproducing Kernel Methods. Computer Methods in Applied Mechanics and Engineering, vol. 199, pp. 1471-1490, 2010 ( DOI:10.1016/j.cma.2009.12.015)
  101. R. Campos–Amezcua, S. Khelladi, F. Bakir, Z. Mazur-Czerwiec, Ch. Sarraf, R. Rey:Numerical Analysis of Unsteady Cavitating Flow in an Axial Inducer. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, vol. 224/2, pp. 223-238, 2010 (DOI:10.1243/09576509JPE647)
  102. S. Khelladi, S. Kouidri, R. Rey:Isom's thickness noise for axial and centrifugal subsonic fans. Journal of Sound and Vibration, vol. 313/1-2, pp. 1-6, 2008 (DOI:10.1016/j.jsv.2008.01.044)
  103. S. Khelladi, S. Kouidri, F. Bakir, R. Rey:Predicting tonal noise from a high rotational speed centrifugal fan. Journal of Sound and Vibration, Vol. 313/1-2, pp. 113-133, 2008 ( DOI:10.1016/j.jsv.2007.11.044)
  104. S. Khelladi, Smaïne Kouidri, F. Bakir, R. Rey:Flow Study in the Impeller-Diffuser Interface of a Vaned Centrifugal Fan. Journal of Fluids Engineering, Vol. 127 , pp. 495-502, 2005 (DOI:10.1115/1.1900138)

Patents

  1. Motor Vehicle Fan, K. Azzouz, A. Mammeri, F. Bakir, S. Khelladi - US Patent App. US 11,313,380 B2, Apr. 26, 2022, Déposant: VALEO SYSTEME STHERMIQUES
  2. Ventilation device for a motor vehicle, M. Lissner, A. Mammeri, K. Azzouz, F. Bakir, S. Khelladi, I. Dobrev - US Patent App. 2021/0277818 A1, Sep. 9,  2021, Déposant: VALEO SYSTEME STHERMIQUES
  3. Fan device for a motor vehicle, K. Azzouz, A. Mammeri, F. Bakir, S. Khelladi, C. Lebert, - US Patent App. 2021/0218315 A1, Jul . 15 , 2021, Déposant: VALEO SYSTEME STHERMIQUES
  4. Motor-fan assembly comprising a hydraulic heat transfer fluid cooling circuit, K. Azzouz, F. Bakir, S. Khelladi - US Patent App. 16/081,679, 2019, Déposant: VALEO SYSTEME STHERMIQUES
  5. Phase separator for a refrigerant circuit in a ventilation, heating and/or air-conditioning system of a motor vehicle, K. Azzouz, S. Khelladi, Numéro de publication internationale : WO2018211135A1, Date de la publication internationale : 22.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  6. Motor vehicle fan, K. Azzouz, A. Mammeri, F. Bakir, S. Khelladi, Numéro de publication internationale : WO2018229081A1, Date de la publication internationale : 20.12.2018, Déposant: VALEO SYSTEME STHERMIQUES
  7. A propeller fan motor assembly incorporating a hydraulic cooling circuit of a heat transfer fluid, K. Azzouz, S. Khelladi, F. Bakir, Numéro de publication nationale : FR3048464A1, Date de publication : 30.03.2018, Déposant: VALEO SYSTEME STHERMIQUES
  8. Motor-fan assembly comprising a hydraulic heat transfer fluid cooling circuit, K. Azzouz, F. Bakir, S. Khelladi, Numéro de publication internationale : WO2017149227A1, Date de la publication internationale : 08.09.2018, Déposant: VALEO SYSTEME STHERMIQUES
  9. Centrifugal fan including a heat exchange circuit , J. Balandin, K. Azzouz, F. Bakir, S. Khelladi, Numéro de publication internationale : WO2018060651A1, Date de la publication internationale : 04.05.2018, Déposant: VALEO SYSTEME STHERMIQUES
  10. A drive system of a propeller of a motor fan unit, incorporating a hydraulic cooling circuit of a heat transfer fluid, K. Azzouz, S. Khelladi, F. Bakir, Numéro de publication nationale : FR3048465A1, Date de publication : 08.09.2017, Déposant: VALEO SYSTEME STHERMIQUES
  11. Phase separator comprising a flow disruptor, K. Azzouz, S. Khelladi, Numéro de publication internationale : WO2018211136A1, Date de la publication internationale : 22.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  12. Ventilation device for a motor vehicle, K. Azzouz, M. Lissner S. Khelladi, F. Bakir, I. Dobrev, Numéro de publication internationale : WO2018197817A1, Date de la publication internationale : 01.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  13. Phase separator comprising plates, K. Azzouz, S. Khelladi, Numéro de publication nationale : FR3066404A1, Date de publication : 23.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  14. Ventilation device with tubes provided with air flow guide means for a motor vehicle heat exchange module, K. Azzouz, M. Lissner S. Khelladi, F. Bakir, I. Dobrev, Numéro de publication internationale : WO2018197818A1, Date de la publication internationale : 01.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  15. Ventilation device has tubes provided with air flow guide means for modulus of motor vehicle heat exchange, K. Azzouz, M. Lissner S. Khelladi, F. Bakir, I. Dobrev, Numéro de publication nationale : FR3065749A1, Date de publication : 02.11.2018, Déposant: VALEO SYSTEME STHERMIQUES
  16. Phase separator for separating liquid and gas phases contained in fluid in cooling circuit of internal combustion engine of car, has outlet emerging in central hollow portion of body to allow evacuation of gas phase from fluid, V. Atim, R. Yu, B. Popineau, F. Bakir, S. Khelladi, Numéro de publication nationale : FR2988013A1, Date de publication : 20.09.2013, Déposant: Renault SAS

Books edition

  1. H.R. Vanaei, S. Khelladi, A. Tcharkhtchi, “Polymers and their application in 3D printing”, Printed edition of the special issue published in Polymers, MDPI, 2023

Chapters

  1. Vanaei, S., Vanaei, S., Kanhonou, M., Khelladi, S., Tcharkhtchi, A. and Vanaei, H.R. (2024). Importance of Machine Learning in 3D Bioprinting. In 3D Bioprinting from Lab to Industry (eds P. Saha, S. Thomas, J. Kim and M. Ghosh). https://doi.org/10.1002/9781119894407.ch13
  2. L. Ramírez, X. Nogueira, P. Ouro, F. Navarrina, S. Khelladi, I Colominas:A Higher-Order Chimera Method Based on Moving Least Squares. Recent Advances in CFD for Wind and Tidal Offshore Turbines, 01/2019: pages 73-82; , ISBN: 978-3-030-11886-0, DOI:10.1007/978-3-030-11887-7₇
  3. A. Martínez, L. Ramírez, X. Nogueira, F. Navarrina, S. Khelladi:A High-Order Finite Volume Method for the Simulation of Phase Transition Flows Using the Navier–Stokes–Korteweg Equations. Recent Advances in CFD for Wind and Tidal Offshore Turbines, 01/2019: pages 127-136; , ISBN: 978-3-030-11886-0, DOI:10.1007/978-3-030-11887-7_12
  4. S. Zouaoui, A. Ait Aider, H. Djebouri, K. Mohammedi, S. Khelladi:Motion of a Solid Particle in a Water Flow Inside a Pipe: Fundamentals. Exergy for A Better Environment and Improved Sustainability 1, 08/2018: pages 217-231; , ISBN: 978-3-319-62571-3, DOI:10.1007/978-3-319-62572-0_15
  5. E. Marechal, S. Khelladi, F. Ravelet, F. Bakir, O. Delepierre-Massue:Towards numerical simulation of snow showers in Jet-engine fuel systems. Advances in Hydroinformatics, 1 edited by Philippe Gourbesville, Jean Cunge, Guy Caignaert, 01/2016; Springer-Verlag., ISBN: 978-981-287-615-7
  6. J. Thisse, C. Polacsek, J. Mayeur, S. Khelladi, X. Gloerfelt, A. Lafitte:Numerical Simulations of Shock-Wave Propagation in Turbofan Intakes. 01/2016, AIAA;
  7. P. Tomov, S. Khelladi, Ch. Sarraf, F. Bakir:Numerical Modeling of Aerated Cavitation Using Compressible Homogeneous Equilibrium Model. Advances in Hydroinformatics - SimHydro 2014, Edited by Gourbesville Philippe, Cunge Jean, Caignaert Guy, 09/2015: chapter Numerical Modeling of Aerated Cavitation Using Compressible Homogeneous Equilibrium Model: pages 531-549; Springer Science + Business Media Singapore 2016., ISBN: ISBN 978-981-287-614-0, DOI:10.1007/978-981-287-615-7_36
  8. A. Tcharkhtchi, F. Nony, S. Khelladi, J. Fitoussi, S. Farzaneh:Epoxy/amine for composites reactive materials systems and their thermomechanical properties. Advances in Composites Manufacturing and Process Design, Woodhead Publishing edited by Philippe Boisse, 07/2015: chapter 13; Elsevier., ISBN: 978-1-78242-307-2, DOI:10.1016/B978-1-78242-307-2.00013-0
  9. L. Ramírez, X. Nogueira, S. Khelladi, J.C. Chassaing, I. Colominas:A higher-order finite volume method with collocated grid arrangement for incompressible flows. Computational Methods and Experimental Measurements XVII, WIT Press edited by G M Carlomagno, D Poljak, C A Brebbia, 05/2015; WIT Transactions on Modelling and Simulation., ISBN: 978-1-84564-922-7, DOI:10.2495/CMEM150101
  10. L. Ramírez, X. Nogueira, C. Foulquié, S. Khelladi, J.-C. Chassaing, I. Colominas:A Moving Least Squares-Based High-Order-Preserving Sliding Mesh Technique with No Intersections. CFD for Wind and Tidal Offshore Turbines, 01/2015: pages 27-36; , ISBN: 978-3-319-16201-0, DOI:10.1007/978-3-319-16202-7_3
  11. X. Nogueira, S. Khelladi, I. Colominas, F. Bakir, J.-C. Chassaing:On the use of Moving Least Squares for pressure discretization in low Mach number flows. Numerical Methods for Hyperbolic Equations Theory and Applications, 11/2012; CRC Press., DOI:10.1201/b14172-51
  12. S. Khelladi, Ch. Sarraf, F. Bakir, R. Rey:Aerodynamic and Aeroacoustic Study of a High Rotational Speed Centrifugal Fan. Aerodynamics, 05/2012; InTec., ISBN: 979-953-307-395-7, DOI:10.5772/37645
  13. R. Campos-Amezcua, S. Khelladi, Z. Mazur-Czerwiec, F. Bakir, A. Campos-Amezcua, R. Rey:Numerical and Experimental Study of Mass Transfer Through Cavitation in Turbomachinery. Mass Transfer - Advanced Aspects, 07/2011; , ISBN: 978-953-307-636-2, DOI:10.5772/20006

Communications

  1. B. Manser, I. Belaidi, S. Khelladi, A. Hamrani, F. Bakir: Thermal Analysis of Steady-Stats Performances of Hydrodynamic Misaligned Journal Bearings Considering Surface Texturing Effects, ICAMRE2018, Boumerdes -Algeria, November 28-29, 2018
  2. N. Meskine, M. Kessal, S. Khelladi :Sur Conditions de Stabilité d’un Compresseur Axial, ICAMRE2018, Boumerdes -Algeria, November 28-29, 2018
  3. B. Abdellah, B. Noura, S. Khelladi:Effect of Computational Grid on Prediction of a Vertical axis Wind turbine Rotor Using Delayed Detached-Eddy Simulations. 2018 International Conference on Wind Energy and Applications in Algeria (ICWEAA); 11/2018, DOI:10.1109/ICWEAA.2018.8605048
  4. B. Manser, I. Belaidi, S. Khelladi, A. Hamrani, F. Bakir:Numerical analysis of steady-state performances of hydrodynamic misaligned journal bearings considering surface texturing effects. Fourth International Conference on Energy, Materials, Applied Energetics and Pollution. ICEMAEP2018., April 29-30, 2018, Constantine, Algeria.; 04/2018
  5. M. Ait-Chikh, I. Belaidi, S. Khelladi, F. Bakir:Optimisation multi-objectif du design d'une pompe axiale basée sur l'algorithme bio-inspiré de Coucou. JEM'2018, EMP Bordj El Bahri Algiers; 03/2018
  6. B. Cherabi, A. Hamrani, I. Belaidi, S. Khelladi, F. Bakir:Proper Generalized Decomposition pour la résolution des problèmes de la lubrification des paliers hydrodynamiques. JEM'2018, EMP Bordj El Bahri Algiers; 03/2018
  7. B. Manser, I. Belaidi, S. Khelladi, A. Hamrani, F. Bakir:Influence de la forme des textures sur les performances statiques d'un palier hydrodynamique soumis à un chargement stationnaire. JEM 2018, EMP Bordj El Bahri, Algiers; 03/2018
  8. M. Ait-Chikh, I. Belaidi, S. Khelladi, A. Hamrani:Automatic Design of Axial Turbomachinery Using Teaching Learning Based Optimization Algorithm. Automatic Design of Axial Turbomachinery Using Teaching Learning Based Optimization Algorithm, CAM 2017, Constantine Algeria; 10/2017
  9. B. Sy, C. Foulquié, S. Khelladi, M. Deligant, Manuel Henner, F. Bakir:Toward a Near-Field CAA-CFD Coupling Approach: Application to a Centrifugal Blower. Proceedings of 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics ETC12, Stockholm, Sweden; 04/2017, DOI:10.29008/ETC2017-148
  10. T. Azzam, R. Paridaens, F. Ravelet, S. Khelladi, H. Oualli, F. Bakir :Experimental investigation of active control by steady air injection in the tip clearance gap of an axial fan, ISROMAC-16, April 10-15, 2016, Honolulu, HI, USA
  11. F. Ravelet, M. Younsi, F. Bakir, S. Khelladi :Numerical simulation of the unsteady aerodynamics in an axial Counter-Rotating fans stage, ISROMAC-16, April 10-15, 2016, Honolulu, HI, USA
  12. K. Croci, P. Tomov, F. Ravelet, A. Danlos, S. Khelladi, Jean-Cristophe Robinet:Investigation of Two Mechanisms Governing Cloud Cavitation Shedding: Experimental Study and Numerical Highlight. ASME IMECE 2016, Phoenix, Arizona; 11/2016, DOI:10.1115/IMECE2016-65420
  13. Y. Mohand, B. Hutchinson, F. Ravelet, S. Khelladi, F. Bakir:Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter-Rotating Fan Stage. 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2016), Jul 2016, Malaga, Spain. 2016, Spain; 07/2016
  14. C. Foulquié, S. Khelladi, M. Deligant, J. Mardjono, M. Henner:High-order aeroacoustics propagation solver with sliding-mesh capabilities for subsonic turbomachinery. 22nd AIAA/CEAS Aeroacoustics Conference; 05/2016, DOI:10.2514/6.2016-2723
  15. J. Thisse, C. Polacsek, J. Mayeur, S. Khelladi, X. Gloerfelt, A. Lafitte:Numerical Simulations of Shock-Wave Propagation in Turbofan Intakes. 22nd AIAA/CEAS Aeroacoustics Conference; 05/2016, DOI:10.2514/6.2016-2879
  16. P. Tomov, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir, D. Giroux:Numerical modeling of a two-dimensional aerated cavitation in a symmetrical venturi nozzle. XXII Congrès Français de Mécanique, Lyon, France; 08/2015
  17. P. Tomov, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir, Daniel Giroux:Numerical modeling of a two-dimensional aerated cavitation in a symmetrical venturi nozzle. XXII Congrès Français de Mécanique, Lyon, France; 08/2015
  18. T. Azzam, R. Paridaens, F. Ravelet, M. Mekadem, S. Khelladi, H. Oualli, F. Bakir:Active control of the leakage flow by air injection into the rotational shroud or the fixed carter of an axial fan composed of hollow blades. XXII Congrès Français de Mécanique; 08/2015
  19. P. Tomov, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir:Experimental Study of a Horizontally Aerated Cavitating Flow in an Axisymmetrical Venturi Nozzle. Hydraulic Machines and Cavitation, Nantes, France; 06/2015
  20. S. Zouaoui, H. Djebouri, K. Mohammedi, S. Khelladi, A. Ait Aider:Experimental Study on the Effects of Big Particles Physical Characteristics on the Hydraulic Transport Inside a Horizontal Pipe. 8th ICCHMT,, Istanbul, Turkey; 05/2015
  21. A. Hamidi, S. Khelladi, L. Illoul, A. Tcharkhtchi:Modeling Reactive Rotational Molding Process. XIII International Conference on Engineering Materials and Applications, Istanbul, Turkey; 04/2015
  22. T. Ait-Ali, S. Khelladi, L. Ramírez, X. Nogueira:Cavitation Modeling Using Compressible Navier-Stokes & Korteweg Equations. Multiphase Flow, Valencia, Spain; 04/2015, DOI:10.2495/MPF150361
  23. C. Foulquié, S.Khelladi, L. Ramírez, X. Nogueira, M. Deligant, J. Mardjono, M. Henner:Toward a high-order preserving sliding-mesh approach for computational aeroacoustics in subsonic turbomachinery. European Turbomachinery Conference, Madrid, Spain; 03/2015
  24. A. Hamidi, S. Khelladi, L. Illoul, A. Tcharkhtchi:The Effect of Surface Tension in Polymer Flow during Reactive Rotational Molding. 19th Australasian Fluid Mechanics Conference, Melbourne, Australia; 12/2014
  25. M. Deligant, S. Khelladi, F. Bakir, P. Podevin:Surge Limit Prediction of Centrifugal Compressor Using Semi Classical Signal Analysis. ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada; 11/2014, DOI:10.1115/IMECE2014-37546
  26. E. Marechal, P. Tomov, S. Khelladi, F. Bakir:A hybrid Finite Volume - Discrete Elements Method for two-phase flows : Application to Snow Showers in jet-engine fuel systems. IMA Conference on Mathematical Modelling of Fluid Systems, Engineers’ House; 09/2014
  27. P. Tomov, S. Khelladi, Ch. Sarraf, F. Bakir:Numerical Modeling of Aerated Cavitation using a Penalization Approach for Air Bubble Modeling Coupled to Homogeneous Equilibrium Model. ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal; 07/2014, DOI:10.1115/IMECE2014-39844
  28. A. Krimi, M. Rezoug, S. Khelladi, M. Deligant:Fast and accurate algorithm for modeling complex free surface flows. The 11th International Conference for Mesoscopic Methods in En- gineering and Science, New York, USA; 07/2014
  29. E. Marechal, S. Khelladi, F. Ravelet, F. Bakir, Olivier Delepierre-Massue:Towards Numerical Simulation of Snow Showers in Jet Engine Fuel Systems. SimHydro 2014 : Modelling of rapid transitory flows, Sophia Antipolis - FRANCE; 06/2014, DOI:10.1007/978-981-287-615-7_41
  30. P. Tomov, S. Khelladi, Ch. Sarraf, F. Bakir:Numerical Modeling of Aerated Cavitation using Compressible Homogeneous Equilibrium Model. Advances in Hydroinformatics - SimHydro 2014, Sophia-Anipolis, FRANCE; 06/2014
  31. A. Hamidi, S. Khelladi, L.illoul, A.Tcharkhtchi:Implementation of surface tension in polymer flow during Reactive Rotational Molding. 9th international SPHERIC workshop, Paris, France; 06/2014
  32. M. Deligant, P. Convert, S. Khelladi, F. Bakir:Modélisation et Analyse du Fonctionnement du Récupérateur d’une Installation d'Essais de Turbine en Cycle Organique de Rankine. COFRET'14 -Septième édition du COlloque FRancophone en Energie, Environnement, Economie et Thermodynamique, Paris - Cnam - 23 - 24 - 25 avril 2014; 04/2014
  33. S. Parrang, J. Ojeda, S. Khelladi, M. Gabsi:Aeroacoustic noise prediction for SRM. 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014); 04/2014, DOI:10.1049/cp.2014.0389
  34. M. Belhi, M. Deligant, P. Podevin, S. Khelladi:Inverse Methodology for Centrifugal Compressor Design Using Genetic Algorithm. BulTrans-2013 Proceedings, Sofia; 11/2013
  35. X. Nogueira, S. Khelladi, J.-C. Chassaing, I. Colominas:On the computation of low Mach flows using density-based solvers. European Congress on Computational Mechanics ECCOMAS 2012, Viena, Austria; 09/2012
  36. L. Bergerat, S. Khelladi, F. Bakir:Cavitation Modeling of Thermosensitive Fluids Using Compressible Phases Approach. Proceedings of the 8th International Symposium on Cavitation, CAV2012, Singapore; 08/2012
  37. H. Kim, Y. Jo, I.H. Bai, Y. J. Moon, F. Ravelet, S. Khelladi, F. Bakir:3D Computation of Axial-flow Fan Noise by LPCE - Brinkman Penalization Method. FAN2012, International Conference on Fan Noise, Technology and Numerical Methods, Senlis, France; 04/2012
  38. S. Khelladi, X. Nogueira, M. Solis, F. Bakir, I. Colominas, Jacky Mardjono:A high-resolution preserving sliding-mesh approach based on meshless methods : application to acoustic propagation in presence of rotor/stator features. Joint meeting : 11th Congrès Français d’Acoustique and 2012 IOA annual meeting, Nantes, France; 04/2012
  39. E. Tannoury, B. Demory, M. henner, S. Khelladi, F. Bakir:Blade segmentation strategy for tonal noise computation of low Mach axial fans. 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-14, Honolulu, HI, USA; 03/2012
  40. Y. Obikane, S. Khelladi, F. Bakir, F. Margnat:Estimation of a Turbulence Model in Cavitation Effect on the Reynolds Stress Equation with Rotor Vibrations. 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition; 01/2012, DOI:10.2514/6.2012-599
  41. Y. Obikane, S. Khelladi:Numerical Study of Development of Karman Vortex in Blade's Passage in Centrifugal Compressors and Pumps. 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition; 01/2012, DOI:10.2514/6.2012-940
  42. I. Colominas, J.-C. Chassaing, S. Khelladi, L. Ramirez, X. Nogueira:Meshless approximations for the development of high order finite volume methods. 6th International Workshop Meshfree Methods for Partial Differential Equations, Bonn, Germany; 10/2011
  43. X. Nogueira, S. Khelladi, L. Cueto-Felgueroso, I. Colominas:Compressible flow applications of a finite volume method based on Moving Least Squares. 6th International Workshop Meshfree Methods for Partial Differential Equations, Bonn, Germany; 10/2011
  44. A. Zaaraoui, S. Khelladi:Débitmètre à effet vortex avec capteur à jauge de contraintes et mesure dans une section quadrangulaire. Congrès Français de Mécanique, Besançon, France; 09/2011
  45. V. Atim, S. Khelladi, F. Bakir, R. Yu:Moteur à combustion interne : stockage thermique pour la réduction des émission et de la consommation. Congrès Français de Mécanique, Besançon, France; 09/2011
  46. X. Nogueira, S. Khelladi, I. Colominas, F. Bakir:On the use of Moving Least Squares for pressure discretization in low Mach number flows. Numerical Methods for Hyperbolic Equations : Theory an Applications, An international conference to honour Professor E.F. Toro, Santiago de Compostela; Spain; 4 July 2011 through 9 July 2011; 07/2011
  47. L. Ramirez, X.Nogueira, S. Khelladi, J.C. Chassaing, I. Colominas:On the Use of Meshless Methods for the Development of High-Accurate Finite Volume Schemes. ECCOMAS, ADMOS 2011, International Conference on Adaptive Modeling and Simulation, Paris, France; 06/2011
  48. X. Nogueira, S. Khelladi, H. El-Hadjen, L. Ramirez, I. Colominas:Métodos de volúmenes finitos con técnicas meshless de aproximación para la resolución de problemas de acústica en turbomáquinas. Congresso CMNE, Coimbra, Portugal; 06/2011
  49. E. Tannoury, S. Khelladi, B. Demory, M. Henner, F. Bakir:Tonal Noise Prediction of an Automotive Engine Cooling Fan : ComParison Between Analatical Models and Acoustic Analogy Results. 9th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, Istanbul, Turkey; 03/2011
  50. R. Campos-Amezcua, F. Bakir, S. Khelladi, L. Bergerat, Z. Mazur-Czerwiec, R. Rey:Numerical study of unsteady cavitating flow in a three-dimensional axial inducer. 9th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, Istanbul, Turkey; 03/2011
  51. M. Solis, S. Khelladi, F. Bakir:A New High-Precision Solver to Predict Pressure Fluctuations in Centrifugal Pumps. ASME-JSME-KSME 2011 Joint Fluids Engineering Conference; 01/2011, DOI:10.1115/AJK2011-06087
  52. S. Khelladi, X. Nogueira, H. El-Hadjen, I. Colominas, F. Bakir, Casteleiro M.:Application of a high-order finite volume method to aeroacoustic problems of industrial interest. Mecánica Computacional, Buenos Aires, Argentina; 11/2010
  53. B. Noura, S. Khelladi, R. Dizène, F. Massouh:Simulation numérique d’un écoulement instationnaire 2d en phase de décrochage autour d’une pale d’un rotor éolien. CFSER 2010 1ère Conférence Franco-Syrienne sur les énergies renouvelables, Damas, 24-28 Octobre 2010, Damascus; 10/2010
  54. M. Solis, F. Ravelet, S. Khelladi, F. Bakir:Experimental and Numerical Analysis of the Flow Inside a Configuration Including an Axial Pump and a Tubular Exchanger. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 08/2010, DOI:10.1115/FEDSM-ICNMM2010-30723
  55. X. Nogueira, S. Khelladi, L. Cueto-Felgueroso, F. Bakir, I. Colominas, Héctor Gómez:Implicit Large-Eddy Simulation with a Moving Least Squares-based finite volume method. 9th World Congress on Computational Mechanics, Sydney, Australia; 07/2010
  56. F. Ravelet, S. Khelladi, H. Nouri, F. Bakir, H. Kim, Y. Bae, Y. J. Moon:Study of the Aerodynamics/Aeroacoustics of an Axial-Flow Fan: Experimental Validation of a LES/LPCE/Brinkman Penalization Method. 16th AIAA/CEAS Aeroacoustics Conference (31st AIAA Aeroacoustics Conference); 06/2010, DOI:10.2514/6.2010-3869
  57. S. Khelladi, S. Martin, X Nogueira, F. Bakir:Higher-Order Preserving Methods for Unsteady Finite Volume Solvers Based on Reproducing Kernels: Application to Aeroacoustic Problems, 16th AIAA. 16th AIAA/CEAS Aeroacoustics Conference; 06/2010, DOI:10.2514/6.2010-3817
  58. M. Asgarpour, F. Bakir, S. Khelladi, A. Tcharkhtchi:Sintering of polymer powders. BYPOS 2010, Trencianske Teplice (Slovakia); 06/2010
  59. S. Khelladi, H. El-Hadjen, X. Nogueira, F. Bakir, M.Ouadjaout:Toward a High Order Unsteady Finite Volume Solver Based on Moving Least Squares Approximation Method : Application to Aeroacoustic Problems. The IMACS World Congress on Computational and Applied Mathema- tics & Applications in Science and Engineering, Athens, GA, USA; 08/2009
  60. M. Asgarpour, F. Bakir., S. Khelladi, A. Tcharkhtchi:Particle sintering and migration of bubbles during rotational molding of aerodynamic parts. Rotomoulding, Thermoforming and Stretch- Blow Moulding, Albi, France; 03/2009
  61. R. Campos-Amezcua, F. Bakir, S. Khelladi, R. Rey:Numerical and Experimental Analysis of Cavitating Flow in an Axial Inducer with/without Tip-Clearence. 8th Europian Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Graz, Austria; 03/2009
  62. M. Solis, F. Bakir, S. Khelladi:Pressure Fluctuations Reduction in Centrifugal Pumps: Influence of Impeller Geometry and Radial Gap. ASME 2009 Fluids Engineering Division Summer Meeting; 01/2009, DOI:10.1115/FEDSM2009-78240
  63. S. Khelladi, X. Nogueira, F. Bakir, L. Cueto-Felgueroso, I. Colominas:Finite Volume Solvers and Moving Least Square Approximations for the Linearized Euler Equations on Unstructured Grids. Acoustics08, Paris; 06/2008
  64. S. Khelladi, D. Fedala, F. Bakir, R. Rey:Validation of Thickness and Loading Noise Codes by Isom’s Formula Applied to Subsonic Axial and Centrifugal Fans. Acoustics08, Paris; 06/2008
  65. X. Nogueira, L. Cueto-Felgueroso, I. Colominas, S. Khelladi, F. Navarrina, M. Casteleiro:A numerical approach based on Moving Least Squares approximations for the resolution of acoustic problems on unstructured grids. Advanced Computational Methods in Engineering (ACOMEN 2008), University of Liège, Belgium; 05/2008
  66. R. Campos-Amezcua, F. Bakir, S. Khelladi, R. Rey:Numerical Study of theUnsteady Cavitating Flow. 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA; February 17-22, 2008; 02/2008
  67. S. Khelladi, R. Cao, R. Noguera, S. Kouidri, F. Bakir, R. Rey:Effects of Tip Clearance on the Performance and the Flow Field of a High Rotational Speed Centrifugal Fan. Proceedings of COBEM 2007, 19th International Congress of Mechanical Engineering; 11/2007
  68. S. Khelladi, S. Kouidri, R. Rey:Isom’s Thickness Noise Formula for Axial and Centrifugal Subsonic Fans. InterNoise 2007, ISTANBUL, TURKEY; 08/2007
  69. S. Khelladi, S. Kouidri, F. Bakir, R. Rey:A Numerical Study on the Aeroacoustic of a Vaned Centrifugal Fan. 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005, Houston, TX; United States;; 06/2005, DOI:10.1115/FEDSM2005-77134
  70. A. Tcharkhtchi, S. Khelladi, R. Rey :Optimisation des procédés, Rotomoulage, Thermoformage et Soufflage", Tours, 1-2 décembre 2005.
  71. S. Khelladi, Smaïne Kouidri, F. Bakir, R. Rey:Unsteady Flow in Multistage Centrifugal Fans. ASME 2004 Heat Transfer/Fluids Engineering Summer Conference, CHARLOTTE NORTH CAROLINA USA; 06/2004, DOI:10.1115/HT-FED2004-56792
  72. S. Khelladi, S. Kouidri, F. Bakir, R. Rey:Optimization of 3D unsteady fluid flow in multistage centrifugal fan. ASME Fluids Engineering Forum, Charlotte, USA; 01/2004
  73. F. Chinesta, E. Perot, S. Khelladi, A. Tcharkhtchi :Simulation du procédé du rotomoulage, Le Pole Européen de Plasturgie (PEP) à Bellignat, 17-18 juin 2003

Others

  1. A. Archer, A. Dazin, J. Decaix, S. Khelladi, C. Munch-alligne : Compte-rendu des Journées 'Machines hydrauliques, Cavitation' 2019. Sion, HES-SO, 6 et 7 novembre 2019, La Houille Blanche 2020, 1, 95–97
  2. A. Dazin, S. Khelladi, A. Archer: Compte-rendu des Journées 'Machines hydrauliques, Cavitation' 2017. Paris, ENSAM, 8 et 9 Novembre 2017. La Houille Blanche 2018, 1,  100 - 102
  3. F. Eleiwi, T.-M. Laleg-Kirati, S. Khelladi, F. Bakir :A Semi-Classical Signal Analysis Method for the Analysis of Turbomachinery Flow Unsteadiness, World Academy of Science, Engineering and Technology, vol. 59, pp. 215-218, 2011
  4. S. Rivière, S. Khelladi, S. Farzaneh, F. Bakir, A. Tcharkhtchi, F. Nony, Ph. Mazabraud:Simulation de l’écoulement d’un liquide réactif au cours du rotomoulage, Choc Focus no2 juillet 2011, La chimie CEA/DAM, pp. 28-29, 2011
  5. A. Tcharkhtchi, S. Khelladi, R. Rey:Flow of Liquid Reactive Polymers During Rotational Moulding, Rotation, volume XIII, issue 1, pp. 45-47 , January – February, 2004