Articles

L. Pora, P. Tomov et T. Magne, (2023) Device and method for improved testing of a hydraulic part for a turbomachine Numéro de publication US : US Patent 11,561,147 déposant Safran Aircraft Engines,

M. Boumrah, S. Garbaya , A. Radgui, (2022) Real-time visual analytics for in-home medical rehabilitation of stroke patient—systematic review - Medical & Biological Engineering & Computing, https://doi.org/10.1007/s11517-021-02493-w, ISSN 1741-0444,

1. H.R. Vanaei , S. Khelladi , M. Deligant , M. Shirinbayan , A. Tcharkhtchi, (2022) Numerical prediction for temperature profile of parts manufactured using fused filament fabrication - Journal of Manufacturing Processes,

R. Ouzani, Z. Alloui, S. Khelladi , M. Specklin , (2022) Dynamics of fingering convection: a numerical study - Environmental Fluid Mechanics, DOI: http://dx.doi.org/10.1007/s10652-022-09838-5,

P. Tomov, L. Pora, R. Paridaens , T. Magne , M. Kebdani , S. Khelladi , F. Bakir , (2022) Study of the Hydraulic Performances of Two Inducers in Water—CO2 Mixture—Toward Performance Improvement With Suppression of Prerotation - ASME. J. Fluids Eng, https://doi.org/10.1115/1.4052951,

N. Abbasnezhad, N. Zirak, S. Champmartin, M. Shirinbayan et F. Bakir, (2022) An Overview of In Vitro Drug Release Methods for Drug-Eluting Stents - Polymers, 14, 2751

L. Achour, M. Specklin, I. Belaidi et S. Kouidri, (2022) Numerical Assessment of the Hydrodynamic Behavior of a Volute Centrifugal Pump Handling Emulsion - Entropy, 24, 221

A. C. Benaicha, A. Fourar, T. Mansouri et M. Fawaz, (2022) Valorization of sediment extracted from the dam in construction works - Modeling Earth Systems and Environment, 8, 4093-4102

S. Boudjelal, A. Fourar et F. Massouh, (2022) Experimental and numerical simulation of free surface flow over an obstacle on a sloped channel - Modeling Earth Systems and Environment, 8, 1025-1033

M. Boumrah, S. Garbaya et A. Radgui, (2022) Real-time visual analytics for in-home medical rehabilitation of stroke patient—systematic review - Medical and Biological Engineering and Computing, 60, 889-906

M. Bourhis, M. Pereira et F. Ravelet, (2022) Experimental investigation of the effect of blade solidity on micro-scale and low tip-speed ratio wind turbines - Experimental Thermal and Fluid Science, 140, 110745

M. Bourhis, M. Pereira et F. Ravelet,, (2022) Performance and flow characteristics of the optimum rotors of Betz, Joukowsky, and Glauert at low tip-speed ratio - Physics of Fluids, 34, 105105

M. Bourhis, M. Pereira, F. Ravelet et I. Dobrev,, (2022) Innovative design method and experimental investigation of a small-scale and very low tip-speed ratio wind turbine - Experimental Thermal and Fluid Science, 130, 110504

T. Capurso, L. Bergamini et M. Torresi, (2022) A new generation of centrifugal pumps for high conversion efficiency - Energy Conversion and Management, 256, 115341

T. Capurso, L. Bergamini et M. Torresi, (2022) Performance analysis of double suction centrifugal pumps with a novel impeller configuration - Energy Conversion and Management, X14, 100227

T. Capurso, M. Stefanizzi, M. Torresi et S. M. Camporeale, (2022) Perspective of the role of hydrogen in the 21st century energy transition - Energy Conversion and Management, 251, 114898

M. Deligant, M. Huebel, T.-N. Djaname, F. Ravelet, M. Specklin et M. Kebdani, (2022) Design and off-design system simulation of concentrated solar super-critical CO2 cycle integrating a radial turbine meanline model - Energy Reports, 8, 1381-1393

M. Deligant, M. Pereira, T.-M. Laleg-Kirati, F. Bakir et S. Khelladi, (2022) Toward a detection approach of surge precursors using a semi-classical signal analysis method - European Physical Journal Plus, 137, 727

E. Douroum, A. Kouadri, A. Tahiri, M. Brihmat et S. Khelladi, (2022) Hydrodynamic and Kinematic Study to Analyze the Mixing Efficiency of Short Passive Micromixers - Industrial and Engineering Chemistry Research, 61, 5994-6009

A. El Magri, S. E. Bencaid, H. R. Vanaei et S. Vaudreuil, (2022) Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering - Polymers, 14, 3674

M. N. Hamlaoui, A. Smaili, I. Dobrev, M. Pereira, H. Fellouah et S. Khelladi, (2022) Numerical and experimental investigations of HAWT near wake predictions using Particle Image Velocimetry and Actuator Disk Method - Energy, 238, 121660

R. M. Himeur, S. Khelladi, M. A. Ait Chikh, H. R. Vanaei, I. Belaidi et F. Bakir, (2022) Towards an Accurate Aerodynamic Performance Analysis Methodology of Cross-Flow Fans - Energies, 15, 5134

R. Hsissou, R. Lachhab, A. E. Magri, S. Echihi, H. R. Vanaei, M. Galai, M. E. Touhami et M. Rafik, (2022) Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium - Polymers, 14, 3100

K. Ignatowicz, E. Solaï, F. Morency et H. Beaugendre, (2022) Data-Driven Calibration of Rough Heat Transfer Prediction Using Bayesian Inversion and Genetic Algorithm - Energies, 15, 3793

135O. Khanfouf, A. Fourar, F. Massouh, A. Zeroual et R. Chiremsel,, (2022) Modeling unsteady turbulent flows around immersed obstacles in a channel with complex geometry - Modeling Earth Systems and Environment, 8, 3907-3926

A. Larabi, M. Pereira, F. Ravelet, T. Azzam, H. Oaulli, L. Menfoukh et F. Bakir, (2022) Numerical Investigation of Parietal Pressure Distribution on NACA0012 Wing Controlled by Microcylindrical Rod Arranged in Tandem - Progress in Computational Fluid Dynamics, An International Journal, 1, 1

A. Megdoud, B. Manser, I. Belaidi, F. Bakir et S. Khelladi, (2022) A reduced-order method with PGD for the analysis of dynamically loaded journal bearing - Comptes Rendus. Mécanique, 350, 361-390

R. Ouzani, Z. Alloui, S. Khelladi et M. Specklin, (2022) Dynamics of fingering convection : a numerical study - Environmental Fluid Mechanics, 22, 203-243

A. Saidani, A. Fourar et F. Massouh, (2022) Influence of temperature on transient flow with cavitation in copper pipe-rig - Modeling Earth Systems and Environment, 8, 2449-2459

A. Saidani, A. Fourar et F. Massouh, (2022) Numerical investigation of temperature effect on water hammer with cavitation in copper pipe rig - Journal of Computational and Applied Research in Mechanical Engineering (JCARME), 11, 279-295

M. Shirinbayan, N. Zirak, O. Saddaoui, A. Mammeri, K. Azzouz, K. Benfriha, A. Tcharkhtchi et J. Fitoussi, (2022) Effect of build orientation and post-curing of (meth)acrylate-based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi-static to high strain rate loadings - The International Journal of Advanced Manufacturing Technology, 123, 1877-1887

E. Solaï, M. Guadagnini, H. Beaugendre, R. Daccord et P. Congedo, (2022) Validation of a data-driven fast numerical model to simulate the immersion cooling of a lithium-ion battery pack - Energy, 249, 123633

J. Song, L. Marcel, M. Specklin, M. Lescroart, J.-L. Hébert et S. Kouidri, (2022) Numerical study of hemolysis induced by shear stress at the junction between aorta and ventricular assistance device outflow graft - International Journal of Heat and Fluid Flow, 95, 108953

M. Specklin, M. Deligant, P. Sapin, M. Solis, M. Wagner, C. N. Markides et F. Bakir, (2022) Numerical study of a liquid-piston compressor system for hydrogen applications - Applied Thermal Engineering, 216, 118946

B. G. Thiam, A. El Magri, H. R. Vanaei et S. Vaudreuil, (2022) 3D Printed and Conventional Membranes—A Review - Polymers, 14, 1023

P. Tomov, L. Pora, R. Paridaens, T. Magne, M. Kebdani, S. Khelladi et F. Bakir,, (2022) Study of the Hydraulic Performances of Two Inducers in Water—CO2 Mixture—Toward Performance Improvement With Suppression of Prerotation - Journal of Fluids Engineering, 144, 041203

J. Toteff, M. Asuaje et R. Noguera, (2022) New Design and Optimization of a Jet Pump to Boost Heavy Oil Production - Computation, 10, 11

H. R. Vanaei, S. Khelladi, M. Deligant, M. Shirinbayan et A. Tcharkhtchi, (2022) Numerical Prediction for Temperature Profile of Parts Manufactured using Fused Filament Fabrication - Journal of Manufacturing Processes, 76, 548-558

H. Vanaei, S. Khelladi et A. Tcharkhtchi, (2022) Roadmap : Numerical - Experimental Investigation and Optimization of 3D-printed Parts using Response Surface Methodology - Materials, 15, 7193

H. R. Vanaei, A. E. Magri, M. A. Rastak, S. Vanaei, S. Vaudreuil et A. Tcharkhtchi, (2022) Numerical and Experimental Analysis toward the Strain Rate Sensitivity of 3D-Printed Nylon Reinforced by Short Carbon Fiber - Materials, 15, 8722

S. Vaudreuil, S.-E. Bencaid, H. R. Vanaei et A. E. Magri, (2022) Effects of Power and Laser Speed on the Mechanical Properties of AlSi7Mg0.6 Manufactured by Laser Powder Bed Fusion - Materials, 15, 8640

N. Zirak, A. M. Maadani, E. Salahinejad, N. Abbasnezhad et M. Shirinbayan, (2022) Fabrication, drug delivery kinetics and cell viability assay of PLGA-coated vancomycin-loaded silicate porous microspheres - Ceramics International, 48, 48-54

N. Zirak, M. Shirinbayan, K. Benfriha, M. Deligant et A. Tcharkhtchi, (2022) Stereolithography of (meth)acrylate-based photocurable resin : Thermal and mechanical properties - Journal of Applied Polymer Science, 139, 52248

N. Zirak, M. Shirinbayan, M. Deligant et A. Tcharkhtchi,, (2022) Toward polymeric and polymer composites impeller fabrication - Polymers, 14, 97

M. BOURHIS , M. PEREIRA , F. RAVELET , I. DOBREV , (2021) Innovative design method and experimental investigation of a small-scale and very low-tip speed ratio wind turbine - elsevier, 10.1016/j.expthermflusci.2021.110504 - 130,

M. PEREIRA , F. RAVELET , K. AZZOUZ, T. AZZAM, H. OUALLI, S. KOUIDRI , F. BAKIR , (2021) Improved Aerodynamics of a Hollow-Blade Axial Flow Fan by Controlling the Leakage Flow Rate by Air Injection at the Rotating Shroud - Entropy, 10.3390/e23070877,

H. Jamshidifarsani, S. Garbaya , T. Lim, P. Blazevic, (2021) Intelligent Games for Learning and the Remediation of Dyslexia: Using Automaticity Principles - IEEE Systems, Man, and Cybernetics Magazine, doi: 10.1109/MSMC.2020.3007131, 15-24

H. Jamshidifarsani, P. Tamayo-Serrano, S. Garbaya , T. Lim, (2021) A three-step model for the gamification of training and automaticity acquisition - Journal of Computer Assisted Learning, https://doi.org/10.1111/jcal.12539, 1–21

H.R. Vanaei , M. Shirinbayan , M. Deligant , S. Khelladi , A. Tcharkhtchi, (2021) In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication: A Journey from Numerical to Experimental Approaches - Thermo, https://doi.org/10.3390/thermo1030021, 332–360

V.-T. Nguyen , Ch. B. Abed, A. Danlos , F. Ravelet , R. Paridaens , M. Deligant , S. Khelladi , F. Bakir , (2021) Experimental study of a novel centrifugal compressor with two successive and independent rotors - Journal of Engineering for Gas Turbines and Power,

M. N. Hamlaoui, A. Smaili, I. Dobrev , M. Pereira , H. Fellouah, S. Khelladi , (2021) Numerical and Experimental Investigations of HAWT Near Wake Predictions using Particle Image Velocimetry and Actuator Disk Method - Energy, doi.org/10.1016/j.energy.2021.121660,

Ch.B. Abed, S. Khelladi , M. Deligant , A. El Marjani, M. Solis , F. Bakir , (2021) Experimental Validation of the Aerodynamic Performance of an Innovative Counter-rotating Centrifugal Compressor - Energies, doi.org/10.3390/en14092582,

A. Kouadri, E. Douroum, Y. Lasbet, T.T. Naas, S. Khelladi , M. Makhlouf, (2021) Comparative study of mixing behaviors using non-Newtonian fluid flows in passive micromixers - International Journal of Mechanical Sciences, doi.org/10.1016/j.ijmecsci.2021.106472,

E. Douroum, S. Laouedj, A. Kouadri, T.T. Naas, S. Khelladi , A. Benazza, (2021) High hydrodynamic and thermal mixing performances of efficient chaotic micromixers: a comparative study - Chemical Engineering and Processing - Process Intensification, 10.1016/j.cep.2021.108394,

L. Bourabia, C.B. Abed, M. Cerdoun, S. Khalfallah, M. Deligant , S. Khelladi , T. Chettibi, (2021) Aerodynamic preliminary design optimization of a centrifugal compressor turbocharger based on a one-dimensional mean-line model - Engineering Computations,

H.R. Vanaei , M. Shirinbayan , S. Vanaei, J. Fitoussi, S. Khelladi , A. Tcharkhtchi, (2021) Multi-scale Damage Analysis and Fatigue Behavior of PLA Manufactured by Fused Deposition Modeling (FDM) - Rapid Prototyping Journal, doi.org/10.1108/RPJ-11-2019-0300,

V.-T. NGUYEN , C B. ABED , A. DANLOS , F. RAVELET , R. PARIDAENS , M. DELIGANT , S. KHELLADI , F. BAKIR , (2021) Experimental study of a novel centrifugal compressor with two successive and independent rotors - Journal of Engineering for Gas Turbines and Power, 144, 011024

V.-T. NGUYEN , A. DANLOS , F. RAVELET , M. DELIGANT , M. SOLIS , S. KHELLADI , F. BAKIR , (2021) Numerical Analysis of a Novel Twin-Impeller Centrifugal Compressor - Computation - MDPI AG,

M. PEREIRA , F. RAVELET , K. AZZOUZ, T. AZZAM, H. OUALLI, S. KOUIDRI , F. BAKIR , (2021) Improved Aerodynamics of a Hollow-Blade Axial Flow Fan by Controlling the Leakage Flow Rate by Air Injection at the Rotating Shroud - MDPI AG - Entropy, 23, 877

N. Abbasnezhad, M. Kebdani, M. Shirinbayan, S. Champmartin, A. Tcharkhtchi, S. Kouidri et F. Bakir, (2021) Development of a model based on physical mechanisms for the explanation of drug release : Application to diclofenac release from polyurethane films - Polymers, 13, 1230

N. Abbasnezhad, M. Shirinbayan, F. Chabi, S. Champmartin, A. Tcharkhtchi et F. Bakir, (2021) Viscoelastic behavior of drug-loaded polyurethane - Polymers, 13, 2608

N. Abbasnezhad, N. Zirak, M. Shirinbayan, S. Kouidri, E. Salahinejad, A. Tcharkhtchi et F. Bakir,, (2021) Controlled release from polyurethane films : Drug release mechanisms - Journal of Applied Polymer Science, 138, 50083

N. Abbasnezhad, N. Zirak, M. Shirinbayan, A. Tcharkhtchi et F. Bakir, (2021) On the importance of physical and mechanical properties of PLGA films during drug release - Journal of Drug Delivery Science and Technology, 63, 102446

(2021) Experimental validation of the aerodynamic performance of an innovative counter-rotating centrifugal compressor - Energies, 14, 2582

I. Barkat, A. Benretem, F. Massouh, I. Meghlaoui et A. Chebel, (2021) Modeling and simulation of forces applied to the horizontal axis wind turbine rotors by the vortex method coupled with the method of the blade element - International Journal of Power Electronics and Drive Systems, 12, 413-420

A. C. Benaicha, A. Fourar, T. Mansouri et F. Massouh,, (2021) Mechanical behavior of the extraction mud dam for use in the manufacture of CEB - Civil Engineering Journal (Iran), 7, 1774-1786

L. Bourabia, C. B. Abed, M. Cerdoun, S. Khalfallah, M. Deligant, S. Khelladi et T. Chettibi, (2021) Aerodynamic preliminary design optimization of a centrifugal compressor turbocharger based on one-dimensional mean-line model - Engineering Computations (Swansea,Wales), 38, 3438- 3469

R. Chiremsel, A. Fourar, F. Massouh et Z. Chiremsel,, (2021) CFD analysis of unsteady and anisotropic turbulent flow in a circular-sectioned 90° bend pipe with and without ribs : A comparative computational study - Journal of Mechanical Engineering and Sciences, 15, 7964-7982

R. Chiremsel, A. Fourar, F. Massouh et Z. Chiremsel, (2021) Numerical Investigation of an Unsteady and Anisotropic Turbulent Flow Downstream a 90◦ Bend Pipe with and without Ribs - Journal of Applied and Computational Mechanics, 7, 1620-1638

E. Douroum, S. Laouedj, A. Kouadri, T. T. Naas, S. Khelladi et A. Benazza, (2021) High hydrodynamic and thermal mixing performances of efficient chaotic micromixers : A comparative study - Chemical Engineering and Processing - Process Intensification, 164, 108394

H. Jamshidifarsani, S. Garbaya, T. Lim et P. Blazevic, (2021) Intelligent Games for Learning and the Remediation of Dyslexia: Using Automaticity Principles - IEEE Systems, Man, and Cybernetics Magazine, 7, 15-24

H. Jamshidifarsani, P. Tamayo-Serrano, S. Garbaya et T. Lim,, (2021) A three-step model for the gamification of training and automaticity acquisition - Journal of Computer Assisted Learning, 37, 994-1014

M. Kebdani et G. Dauphin-Tanguy,, (2021) Dynamic bond graph modelling of a two-phase cooling system with experimental analysis - International Journal of Simulation and Process Modelling, 16, 79-89

A. Kouadri, E. Douroum, Y. Lasbet, T. T. Naas, S. Khelladi et M. Makhlouf, (2021) Comparative study of mixing behaviors using non-Newtonian fluid flows in passive micromixers - International Journal of Mechanical Sciences, 201, 106472

A. Lamri, S. Lamouri, D. E. Kherroub, S. L. Hafsaoui, F. Bakir et A. Tcharkhtchi, (2021) Study and modeling of high-density polyethylene coalescence under the extrussion conditions - International Journal of Material Forming, 14, 191-200

M. A. Laribi, S. Tamboura, J. Fitoussi, M. Shirinbayan, R. T. Bi, A. Tcharkhtchi et H. B. Dali, (2021) Modeling of Short Fiber Reinforced Polymer Composites Subjected to Multi-block Loading - Applied Composite Materials, 28, 973-990

L. Marcel, M. Specklin et S. Kouidri, (2021) The evolution of long-term pediatric ventricular assistance devices : a critical review - Expert Review of Medical Devices, 18, 783-798

V. Motaharinejad, L. Delnaud, M. Fouque, A. Lucas, M. Shirinbayan, J. Fitoussi et A. Tcharkhtchi, (2021) Enhancement of adhesion between the polymeric liner and the metallic connector of high-pressure hydrogen storage tank - International Journal of Material Forming, 14, 249-260

Z. M. Nejad, A. Zamanian, M. Saeidifar, H. R. Vanaei et M. S. Amoli, (2021) 3D Bioprinting of Polycaprolactone-Based Scaffolds for Pulp-Dentin Regeneration : Investigation of Physicochemical and Biological Behavior - Polymers, 13, 4442

V.-T. Nguyen, A. Danlos, F. Ravelet, M. Deligant, M. Solis, S. Khelladi et F. Bakir, (2021) Numerical analysis of a novel twin-impeller centrifugal compressor - Computation, 9, 143

M. Shirinbayan,, (2021) Multiscale damage analysis of the tension-tension fatigue behavior of a lowdensity sheet molding compound - Journal of Applied Polymer Science, 138, 49721

M. Shirinbayan, H. Beigi Rizi, N. Abbasnezhad, A. Tcharkhtchi et J. Fitoussi, (2021) “Tension, compression, and shear behavior of advanced sheet molding compound (A-SMC) : Multi-scale damage analysis and strain rate effect - Composites Part B : Engineering, 225, 109287

M. Shirinbayan, A. Montazeri, M. Nouri Sedeh, N. Abbasnezhad, J. Fitoussi et A. Tcharkhrtchi, (2021) Rotational Molding of Polyamide-12 Nanocomposites : Modeling of the Viscoelastic Behavior - International Journal of Material Forming, 14, 143-152

J. C. Soldado, A. Pesyridis, P. Sphicas, P. Nikolakopoulos, C. N. Markides et M. Deligant, (2021) Axial Turbo-Expander Design for Organic Rankine CycleWaste-Heat Recovery With Comparative Heavy-Duty Diesel Engine Drive-Cycle Performance Assessment - Frontiers in Mechanical Engineering, 7, 676566

J. Song, S. Kouidri et F. Bakir, (2021) Numerical study on flow topology and hemodynamics in tortuous coronary artery with symmetrical and asymmetrical stenosis - Biocybernetics and Biomedical Engineering, 41, 142-155

J. Song, S. Kouidri et F. Bakir, (2021) Review on the numerical investigations of mass transfer from drug eluting stent - Biocybernetics and Biomedical Engineering, 41, 1057-1070

R. Symes, T.-N. Djaname, M. Deligant et E. Sauret, (2021) Design and optimization of a radial inflow turbine for use with a low temperature ORC - Energies, 14, 8526

A. Tcharkhtchi, N. Abbasnezhad, M. Zarbini Seydani, N. Zirak, S. Farzaneh et M. Shirinbayan, (2021) An overview of filtration efficiency through the masks : Mechanisms of the aerosols penetration - Bioactive Materials, 6, 106-122

H. R. Vanaei, M. Deligant, M. Shirinbayan, K. Raissi, J. Fitoussi, S. Khelladi et A. Tcharkhtchi, (2021) A comparative in-process monitoring of temperature profile in fused filament fabrication - Polymer Engineering and Science, 61, 68-76

H. R. Vanaei, M. Shirinbayan, S. F. Costa, F. M. Duarte, J. A. Covas, M. Deligant, S. Khelladi et A. Tcharkhtchi, (2021) Experimental study of PLA thermal behavior during fused filament fabrication - Journal of Applied Polymer Science, 138, 49747

H. R. Vanaei, M. Shirinbayan, M. Deligant, S. Khelladi et A. Tcharkhtchi, (2021) In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication : A Journey from Numerical to Experimental Approaches - Thermo, 1, 332-360

H. R. Vanaei, M. Shirinbayan, S. Vanaei, J. Fitoussi, S. Khelladi et A. Tcharkhtchi, (2021) Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM) - Rapid Prototyping Journal, 27, 371-378

S. Vanaei, M. S. Parizi, F. Salemizadehparizi et H. R. Vanaei, (2021) An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application - Engineered Regeneration, 2, 1-18

M. Vernet, M. Pereira, S. Fauve et C. Gissinger, (2021) Turbulence in electromagnetically driven Keplerian flows - Journal of Fluid Mechanics, 924, A29

M. Zaresharif, F. Ravelet, D. J. Kinahan et Y. M. C. Delaure, (2021) Cavitation control using passive flow control techniques - Physics of Fluids, 33, 121301

A. Kouadri, M. Douroum, S. Khelladi, (2020) Parametric study of the crossing elongation effect on the mixing performances using short Two-Layer Crossing Channels Micromixer (TLCCM) geometry - Chemical Engineering Research and Design, 158, 33-43

Tarek SEGHIR, Ali FOURAR, Abdelatif ZEROUAL , Fawaz MASSOUH, (2020) Dynamic Modelling of the Behaviour of the Ouarkiss Earthen Dam Under Seismic Loads - GeoScience Engineering, 66, 40–52

Chebel A., Benretem A., Dobrev I., Barkat I., (2020) Comparative Study of two control strategies proportional integral and fuzzy logic for the control of a doubly fed induction generator dedicated to a wind application - International Journal of Power Electronics and Drive System (IJPEDS) , 11, 263-274

S. Tamboura, H. Ayari, M. Shirinbayan, M. A. Laribi, H. Bendaly, H. Sidhom, A. Tcharkhtchi, J. Fitoussi, (2020) Experimental and numerical multi-scale approach for Sheet-Molding-Compound composites fatigue prediction based on fiber-matrix interface cyclic damage - International Journal of Fatigue, 135,

H. Ayari, J. Fitoussi, A. Imaddahen, S. Tamboura, M. Shirinbayan, H. Ben Dali, A. Tcharkhtchi, (2020) Two Hybrid Approaches to Fatigue Modeling of Advanced-Sheet Molding Compounds (A-SMC) Composite - Applied Composite Material, 1-18

M. Shirinbayan, J. Fitoussi, F. Meraghni, S. Farzaneh, B. Surowiec, A. Tcharkhtchi, (2020) Effect of a Post-Fatigue Damage on the Residual Dynamic Behavior of Advanced-SMC Composites - Applied Composite Materials, 1313-1331

Abel Martínez, Luis Ramírez, Xesús Nogueira, Sofiane Khelladi, Fermín Navarrina, (2020) A high-order finite volume method with improved isotherms reconstruction for the computation of multiphase flows using the Navier–Stokes–Korteweg equations - Computers & Mathematics with Applications, 79, 673-696

Xesús Nogueira, Luis Ramírez, Javier Fernández-Fidalgo, Michael Deligant, Sofiane Khelladi, Jean-Camille Chassaing, Fermín Navarrina, (2020) An a posteriori-implicit turbulent model with automatic dissipation adjustment for Large Eddy Simulation of compressible flows - Computers & Fluids, 197, 104371

Abel Martínez, Luis Ramírez, Xesús Nogueira , Sofiane Khelladi, Fermín Navarrina, (2020) A high-order finite volume method with improved isotherms reconstruction for the computation of multiphase flows using the Navier–Stokes–Korteweg equations - Computers & Mathematics with Applications, 79, 673-696

Peiyuan Zuo, Abbas Tcharkhtchi, Mohammadali Shirinbayan, Joseph Fitoussi, Farid Bakir, (2020) Effect of thermal aging on crystallization behaviors and dynamic mechanical properties of glass fiber reinforced polyphenylene sulfide (PPS/GF) composites - Journal of Polymer Research, 27 (3), 77

Abderrahmane Lamri, Mohammadali Shirinbayan, Michael Pereira, Laurianne Truffault, Joseph Fitoussi , Saad Lamouri, Farid Bakir, Abbas Tcharkhtchi, (2020) Effects of strain rate and temperature on the mechanical behavior of high‐density polyethylene - Journal of applied polymer science,

Michael Deligant, Quentin Danel, Farid Bakir, (2020) Performance assessment of a standard radial turbine as turbo expander for an adapted solar concentration ORC - Energy Procedia, 129, 1085-1092

N. Abbasnezhad, M. Shirinbayan, A. Tcharkhtchi, F. Bakir, (2020) In vitro study of drug release from various loaded polyurethane samples and subjected to different non-pulsed flow rates - Journal of Drug Delivery Science and Technology, 55, DOI: 10.1016/j.jddst.2020.101500

B. Manser, I. Belaidi , A. Hamrani, S. Khelladi, F. Bakir , (2020) Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach - Tribology - Materials, Surfaces & Interfaces, 33-50

M. Shirinbayan, A. Montazeri, M. Nouri Sedeh, N. Abbasnezhad, J. Fitoussi, A. Tcharkhtchi, (2020) Rotational molding of polyamide-12 nanocomposites: Modeling of the viscoelastic behavior - International Journal of Material Forming,

Lamri A., Shirinbayan M., Pereira M., Truffault L., Fitoussi J., Lamouri S., Bakir F., Tcharkhtchi A, (2020) Effects of strain rate and temperature on the mechanical behavior of high-density polyethylene - Journal of Applied Polymer Science, 137 (23), art. no. 48778

Deligant M., Sauret E., Danel Q., Bakir F. , (2020) Performance assessment of a standard radial turbine as turbo expander for an adapted solar concentration ORC - Renewable Energy, 147, 2833-2841

Zuo P., Tcharkhtchi A., Fitoussi J., Shirinbayan M., Bakir F., (2020) Multiscale thermal study of virgin and aged polyphenylene sulfide reinforced by glass fiber - Journal of Applied Polymer Science, 137, 49031

B. Manser, I. Belaid, A. Hamrani, S. Khelladi, F. Bakir, (2020) Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach - Tribology - Materials, Surfaces & Interfaces, 14, 33-50;DOI: https://doi.org/10.1080/17515831.2019.1666232

Ch. Foulquié, S. Khelladi, M. Deligant, L. Ramirez, X. Nogueira, J. Mardjono, (2020) Numerical Assessment of Fan Blades Screen Effect onFan/OGV Interaction Tonal Noise - Journal of Sound and Vibration, 481, 115428

H. Vanaei, M. Deligant, K. Raissi, S. Khelladi, A. Tcharkhtchi, (2020) Influence of process parameters on thermal and mechanical properties of PLA fabricated by Fused Filament Fabrication - Polymer Engineering and Science,

Jianfei Song, Smaine Kouidri, Farid Bakir, (2020) Numerical study of hemodynamic and diagnostic parameters affected by stenosis in bifurcated artery - Computer Methods in Biomechanics and Biomedical Engineering, 23, 894-905

OUZANI R., Khelladi S., Danlos A., (2020) Mixing in turbulent compressible heated coaxial jets: a numerical study - International Journal of Hydrogen Energy, Vol.45, Issue 33, pp. 16816-16837, 2020. https://doi.org/10.1016/j.ijhydene.2020.01.194

Michel Feidt , Monica Costea, Renaud Feidt, Quentin Danel, Christelle Périlhon, (2020) New Criteria to Characterize the Waste Heat Recovery - Energies 2020, 13(4), 789; https://doi.org/10.3390/en13040789

Menaa A., Lounici M. S., Koubar K., Perilhon C., Khelladi S., Amrouche F., Specklin M., Kessal M., (2020) Investigation expérimentale de l’effet d’addition d’hydrogène sur les émissions polluantes d’un moteur diesel - 10th edition of COFRET (Conference on Energy, Environment, Economy and Thermodynamics), Pitesti Romania,

F. Ravelet , A. Danlos , Farid Bakir , Kilian Croci, Sofiane Khelladi , #Christophe Sarraf, (2020) Development of Attached Cavitation at Very Low Reynolds Numbers From Partial to Super-Cavitation - Applied Sciences, 10.3390/app10207350,

V.-Di. DANG , A. DANLOS , M. PEREIRA , M. SHIRINBAYAN, F. RAVELET , F. BAKIR , A. TCHARKHTCHI, (2020) Effects of some settings of rotational-molding process on the aeromechanical performance of an axial fan - ISROMAC18, 10.1088/1742-6596/1909/1/012024,

P. Tamayo-Serrano, S. Garbaya , S. Bouakaz, P. Blazevic, (2020) A Game-Based Rehabilitation Therapy for Post-Stroke Patients: An Approach for Improving Patient Motivation and Engagement - IEEE Systems, Man, and Cybernetics Magazine, doi: 10.1109/MSMC.2020.3002519, 54-62

- Samir Garbaya , Vincent Hugel, (2020) Modelling Movement Time for Haptic-enabled Virtual Assembly - the International Conference on Human Computer Interaction Theory and Applications (HUCAPP),

A. Boumehani, B. Noura, R. Kerfah, S. Khelladi , I. Dobrev , (2020) Numerical Investigation of the Blade Profile Effect on the Aerodynamic Performance of a Vertical-Axis Wind Turbine Darrieus H-Rotor - Journal of Thermal Engineering , 10.18186/thermal.833673, 388-402

A. Krimi, L. Ramírez, S. Khelladi , F. Navarrina, M. Deligant , X. Nogueira, (2020) Improved δ-SPH Scheme with Automatic and Adaptive Numerical Dissipation - Water, doi.org/10.3390/w12102858,

H.R. Vanaei , M. Deligant , M. Shirinbayan , K. Raissi , J. Fitoussi, S. Khelladi , A. Tcharkhtchi, (2020) A comparative in-process monitoring of temperature profile in fused filament fabrication - Polymer Engineering and Science, doi.org/10.1002/pen.25555,

T.T. Naas, A. Kouadri, S. Khelladi , L. Laib, (2020) Thermal mixing performances of shear-thinning non-Newtonian fluids inside Two-Layer Crossing Channels Micromixer using entropy generation method: Comparative study - Chemical Engineering and Processing - Process Intensification, 10.1016/j.cep.2020.108096,

M. Théodore, R. Parideans , S. Khelladi , F. Bakir , P. Tomov, L. Pora, (2020) Experimental Study of the Hydraulic Performances of Two Three-Bladed Inducers in Water, Water with Dissolved CO2 and Jet Fuel - ASME. J. Fluids Eng, doi.org/10.1115/1.4048143,

H. Vanaei , K. Raissi , M. Deligant , M. Shirinbayan , J. Fitoussi, S. Khelladi , A. Tchatkhtchi, (2020) Towards the Understanding of Temperature Effect on Bonding Strength, Dimensions and Geometry of 3D-printed Parts - Journal of Materials Science, pages14677-14689

H. Vanaei , M. Shirinbayan , S.F. Costa, F.M. Duarte, J.A. Covas, M. Deligant , S. Khelladi , A. Tcharkhtchi, (2020) Experimental study of PLA Thermal Behavior during Fused Filament Fabrication (FFF) - Journal of Applied Polymer Science, doi.org/10.1002/app.49747,

T. Magne , R. Paridaens , F. Ravelet , S. Khelladi , F. Bakir , P. Tomov, L. Pora , (2020) Effect of Gas Content on the Cavitating and Non-Cavitating Performance of an Axial Three-Bladed Inducer - 10.1615/MultScienTechn.2020031533,

N. Abbasnezhad, F. Bakir, M. Shirinbayan et B. Maurel, (2020) New mathematical model based on the kinetic profile for the prediction of multistage drug release from delivery systems - Int. J. Pharm, 10, 1-8

H. Ayari, M. Shirinbayan, A. Imaddahen, S. Tamboura, H. Ben Daly, A. Tcharkhtchi et J. Fitoussi, (2020) Micromechanical Modelling of Dynamic Behavior of Advanced Sheet Molding Compound (A-SMC) Composite - Applied Composite Materials, 27, 321-335

A. Boumehani, B. Noura, R. Kerfah, S. Khelladi et I. Dobrev, (2020) Numerical Investigation of the Blade Profile Effect on the Aerodynamic Performance of a Vertical-Axis Wind Turbine Darrieus H-Rotor - Journal of Thermal Engineering, 6, 388-402

M. Deligant, E. Sauret, Q. Danel et F. Bakir, (2020) Performance assessment of a standard radial turbine as turbo expander for an adapted solar concentration ORC - Renewable Energy, 64, 282-306

F. Hashemi, H. B. Rizi, K. Gheisari, H. Motamedi, M. Pereira et M. Shirinbayan, (2020) Investigation of magnetic composites using as photocatalyst and antibacterial application - Inorganic Chemistry Communications, 119, 108031

M. Kebdani, G. Dauphin-Tanguy et A. Dazin, (2020) Modeling dynamic systems : contribution to the unsteady behavior of a condenser based on the pseudo-bond graph approach - International Journal of Modelling and Simulation, 40, 62-79

A. Krimi, L. Ramírez, S. Khelladi, F. Navarrina, M. Deligant et X. Nogueira, (2020) Improved δ-sph scheme with automatic and adaptive numerical dissipation - Water (Switzerland), 12(10), 2858

M. Lipian, I. Dobrev, F. Massouh et K. Jozwik, (2020) Small wind turbine augmentation : Numerical investigations of shrouded- and twin-rotor wind turbines - Energy, 201, 117588

T. Magne, R. Paridaens, S. Khelladi, F. Bakir, P. Tomov et L. Pora, (2020) Experimental study of the hydraulic performances of two three-bladed inducers in water, water with dissolved CO2, and jet fuel - Journal of Fluids Engineering, Transactions of the ASME, 142, 111210

B. Manser, I. Belaidi, S. Khelladi, M. A. A. Chikh, M. Deligant et F. Bakir, (2020) Computational investigation on the performance of hydrodynamic micro-textured journal bearing lubricated with micropolar fluid using mass-conserving numerical approach - Proceedings of the Institution of Mechanical Engineers, Part J : Journal of Engineering Tribology, 234, 1310-1331

T. Naas, A. Kouadri, S. Khelladi et L. Laib, (2020) Thermal mixing performances of shear-thinning non-Newtonian fluids inside Two-Layer Crossing Channels Micromixer using entropy generation method : Comparative study - Chemical Engineering and Processing - Process Intensification, 156, 108096

A. Oukhlef, A. Ambari et S. Champmartin, (2020) Identification of the pore size distribution of a porous medium by yield stress fluids using Herschel-Bulkley model - Mechanics and Industry, 21, 509

R. Ouzani, M. Si-Ameur, S. Khelladi et A. Danlos, (2020) Mixing in turbulent compressible heated coaxial jets : A numerical study - International Journal of Hydrogen Energy, 45, 16816-16837

F. Ravelet, A. Danlos, F. Bakir, K. Croci, S. Khelladi et C. Sarraf, (2020) Development of attached cavitation at very low reynolds numbers from partial to super-cavitation - Applied Sciences (Switzerland), 10, 7350

C. Sarraf, (2020) A method for assessing the uncertainty of a secondary dynamic pressure standard using shock tube - Measurement Science and Technology, 32, 015013

T. Seghir, A. Fourar, A. Zeroual et F. Massouh, (2020) Dynamic modeling of the behaviour of the Ouarkiss earthen dam under seismic loads - GeoScience Engineering, 66, 40-52

M. Shirinbayan, J. Fitoussi, F. Kheradmand, A. Montazeri, P. Zuo et A. Tcharkhtchi, (2020) Coupling effect of strain rate and temperature on tensile damage mechanism of polyphenylene sulfide reinforced by glass fiber (PPS/GF30) - Journal of Thermoplastic Composite Materials, 1994-2008

P. Tamayo-Serrano, S. Garbaya, S. Bouakaz et P. Blazevic, (2020) A Game-Based Rehabilitation Therapy for Post-Stroke Patients : An Approach for Improving Patient Motivation and Engagement - IEEE Systems, Man, and Cybernetics Magazine, 6, 54-62

H. R. Vanaei, K. Raissi, M. Deligant, M. Shirinbayan, J. Fitoussi, S. Khelladi et A. Tcharkhtchi,, (2020) Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts - Journal of Materials Science, 55, 14677-14689

H. R. Vanaei, M. Shirinbayan, M. Deligant, K. Raissi, J. Fitoussi, S. Khelladi et A. Tcharkhtchi,, (2020) Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication - Polymer Engineering and Science, 60, 1822-1831

C. Foulquié, S. Khelladi, M. Deligant, L. Ramírez, X. Nogueira et J. Mardjono,, (2020) Numerical assessment of fan blades screen effect on fan/OGV interaction tonal noise - Journal of Sound and Vibration, 481, 115428

F. Panayotov, I. Dobrev, F. Massouh et M. Todorov, (2020) Experimental study of the impact of the number of blades on the profile drag of UAV helicopter rotors in hover”, - IOP Conference Series : Materials Science and Engineering, 1002,1, 012001

B. Manser, I. Belaidi, S. Khelladi, M. A. Ait Chikh, M. Deligant, F. Bakir, (2019) Computational investigation on the performance of hydrodynamic micro-textured journal bearing lubricated with micropolar fluid using mass-conserving numerical approach - Journal of Engineering Tribology, 0, 0-0

Nogueira X., Ramirez L., Fernández-Fidalgo J., Deligant M., Khelladi S., Chassaing J.-C., Navarrina F., (2019) An a posteriori-implicit turbulent model with automatic dissipation adjustment for Large Eddy Simulation of compressible flows - Computers and Fluids, 197, 104371

B. Manser, I. Belaidi, A. Hamrani S. Khelladi, F. Bakir, (2019) Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach - Tribology - Materials Surfaces & Interfaces, DOI: 10.1080/17515831.2019.1666232, 0-0

M. Shirinbayan, J. Fitoussi, N. Abbasnezhad, A. Lucas, A. Tcharkhtchi, (2019) Multi-Scale Damage and Mechanical Behavior of Sheet Molding Compound Composites Subjected to Fatigue, Dynamic, and Post-Fatigue Dynamic Loadings - International Journal of Materials and Metallurgical Engineering, 13 (2), 100-107

D. Slimani, B. Elkihel, G. Descombes, C. Perilhon, (2019) Experimental Study of a New Technique to Reduce Absorber Heat Losses Applied for Drying Painted Gas Cylinders, - Journal of Engineering and Applied Sciences, 14(16), 5725-5732, http://medwelljournals.com/abstract/?doi=jeasci.2019.5725.5732 DOI: 10.36478/jeasci.2019.5725.5732

Manser B., Belaidi I., Khelladi S., Chikh M.A.A., Deligant M., Bakir F, (2019) Computational investigation on the performance of hydrodynamic micro-textured journal bearing lubricated with micropolar fluid using mass-conserving numerical approach - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, DOI: 10.1177/1350650119894167

Chikh M.A.A., Belaidi I., Khelladi S., Hamrani A., Bakir, F., (2019) Coupling of inverse method and cuckoo search algorithm for multiobjective optimization design of an axial flow pump - Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 347, 141-165

Lipian M., Dobrev I., Karczewski M., Massouh F., Jozwik K., (2019) Small wind turbine augmentation: Experimental investigations of shrouded- and twin-rotor wind turbine systems - Energy, 186, art. no. 115855

Zouzou B., Dobrev I., Massouh F., Dizene R., (2019) Experimental and numerical analysis of a novel Darrieus rotor with variable pitch mechanism at low TSR - Energy, 186, art. no. 115832

Specklin M., Dubois P., Albadawi A., Delauré Y.M.C., (2019) A full immersed boundary solution coupled to a Lattice–Boltzmann solver for multiple fluid–structure interactions in turbulent rotating flows - Journal of Fluids and Structures, 90, 205-229

Lucas A., Danlos A., Shirinbayan M., Motaharinejad V., Paridaens R., Benfriha K., Bakir F., Tcharkhtchi A., (2019) Conventional rotational molding process and aerodynamic characteristics of an axial-flow hollow blades rotor - ) International Journal of Advanced Manufacturing Technology, 104(1), 1183-1194

Kuruneru S.T.W., Marechal E., Deligant M., Khelladi S., Ravelet F., Saha S.C., Sauret E., Gu Y., (2019) A Comparative Study of Mixed Resolved–Unresolved CFD-DEM and Unresolved CFD-DEM Methods for the Solution of Particle-Laden Liquid Flows - Archives of Computational Methods in Engineering, 26(4), 1239-1254

Croci K., Ravelet F., Danlos A., Robinet J.-C., Barast L., (2019) Attached cavitation in laminar separations within a transition to unsteadiness - Physics of Fluids, 31(6), art. no. 063605 https://doi.org/10.1063/1.5097924

Brasil Junior A.C.P., Mendes R.C.F., Wirrig T., Noguera R., Oliveira T.F., (2019) On the design of propeller hydrokinetic turbines: the effect of the number of blades - Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(6), art. no. 253

Albadawi A., Specklin M., Connolly R., Delauré Y., (2019) A thin film fluid structure interaction model for the study of flexible structure dynamics in centrifugal pumps - Journal of Fluids Engineering, Transactions of the ASME, 141(6), 141-165

Zuo P., Tcharkhtchi A., Shirinbayan M., Fitoussi J., Bakir F., (2019) Overall Investigation of Poly (Phenylene Sulfide) from Synthesis and Process to Applications—A Review - Macromolecular Materials and Engineering, 304, 1

Zuo P., Fitoussi J., Shirinbayan M., Bakir F., Tcharkhtchi A., (2019) Thermal aging effects on overall mechanical behavior of short glass fiber-reinforced polyphenylene sulfide composites - Polymer Engineering and Science, 59(4), 765-772

Zuo P., Tcharkhtchi A., Shirinbayan M., Fitoussi J., Bakir F., (2019) Multiscale physicochemical characterization of a short glass fiber–reinforced polyphenylene sulfide composite under aging and its thermo-oxidative mechanism - Polymers for Advanced Technologies, 30(3), 584-597

Pereira M., Gissinger C., Fauve S., (2019) 1/f noise and long-term memory of coherent structures in a turbulent shear flow - Physical Review E, 99(2), 141-165

Manser B., Belaidi I., Hamrani A., Khelladi S., Bakir F., (2019) Performance of hydrodynamic journal bearing under the combined influence of textured surface and journal misalignment: A numerical survey - Comptes Rendus - Mecanique, 347(2), 141-165

Aid S., Eddhahak A., Khelladi S., Ortega Z., Chaabani S., Tcharkhtchi A., (2019) On the miscibility of PVDF/PMMA polymer blends: Thermodynamics, experimental and numerical investigations - Polymer Testing, 73, 222-231

Kallel, A.C., Koutiri, I., Babaeitorkamani E., Khavandi A., Tamizifar M., Shirinbayan M., Tcharkhtchi A, (2019) Study of bonding formation between the filaments of PLA in FFF process - International Polymer Processing, 34(4), 434-444

NGUYEN V-T, DANLOS A., PARIDAENS R., BAKIR F. , (2019) Study of the effect of the contra-rotating component on the performance of the centrifugal compressor - World Academy of Science, Engineering and Technology, International Journal of Mechanical and Mechatronics Engineering, 13, 383 – 392

Hossein Jamshidifarsani, Samir Garbaya, Theodore Lim, Pierre Blazevic et james Ritchie, (2019) Technology-Based Reading Intervention Programs for Elementary Grades: A Literature Review - ”, Computers & Education, Elsevier, 128, 427-451

Garbaya S., Romano D. et Hattar G. , (2019) Gamification of assembly planning in virtual environment - Assembly Automation, 39(5), 931-943

LUCAS A., Danlos A., SHIRINBAYAN M., MOTAHARINEJAD V., PARIDAENS R., BENFRIHA K., Bakir F., TCHARKHTCHI A., (2019) Conventional rotational molding process and aerodynamic characteristics of an axial-flow hollow blades rotor - The International Journal of Advanced Technology, Issue 1-4, https://doi.org/10.1007/s00170-019-03962-1

Specklin M., Dubois P., Albadawi A., Delaure Y., (2019) A full immersed boundary solution coupled to a Lattice-Boltzmann solver for multiple fluid-structure interactions in turbulent rotating flows - Journal of Fluids and Structures, 90 (2019), 205-229, https://doi.org/10.1016/j.jfluidstructs.2019.06.014

NGUYEN V-T, DANLOS A., PARIDAENS R., BAKIR F., (2019) Study of the effect of the contra-rotating component on the performance of the centrifugal compressor - World Academy of Science, Engineering and Technology, International Journal of Mechanical and Mechatronics Engineering, Vol. A3, 5

S. A. Bahrani, R. Herbaut, L. Royon, K. Azzouz et A. Bontemps, (2019) Experimental investigation of thermal and flow mixing enhancement induced by Rayleigh-like streaming in a milli-mixer - Thermal Science and Engineering Progress, 14, 100434

S. A. Bahrani, L. Humberset, R. Osipian, L. Royon, K. Azzouz et A. Bontemps, (2019) How thermally efficient are chaotic advection mixers ? An experimental assessment - International Journal of Thermal Sciences, 145, 106046

A. C. P. Brasil Junior, R. C. F. Mendes, T. Wirrig, R. Noguera et T. F. Oliveira, (2019) On the design of propeller hydrokinetic turbines : the effect of the number of blades - Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 253

S. Champmartin, A. Ambari et A. Ben Richou, (2019) Kinematics of a cylindrical particle at low reynolds numbers in asymmetrical conditions - Journal of Applied Fluid Mechanics, 12, 1629-1640

M. A. A. Chikh, I. Belaidi, S. Khelladi, A. Hamrani et F. Bakir, (2019) Coupling of inverse method and cuckoo search algorithm for multiobjective optimization design of an axial flow pump - Journal of Power and Energy, 347, 141-165

A. Martínez, L. Ramírez, X. Nogueira, F. Navarrina et S. Khelladi, (2019) A high-order finite volume method for the simulation of phase transition flows using the navier–stokes–korteweg equation - Springer Tracts in Mechanical Engineering, 73, 127-136

I. Meghlaoui, I. Dobrev, F. Massouh, A. Benretem et D. Khalfa, (2019) Accelerated computation of the wake of a horizontal axis wind turbine in unsteady operation using the vortex approach - Applied Journal of Environmental Engineering Science, 5, 24-41

, S. Khelladi et I. Colominas, (2019) A higherorder chimera method based on moving least squares - Springer Tracts in Mechanical Engineering, 73, 73-82

J. Richirt, S. Champmartin, M. Schweizer, A. Mouret, J. Petersen, A. Ambari et F. J. Jorissen, (2019) Scaling laws explain foraminiferal pore patterns - Scientific Reports, 9, 9149

Ramírez L., Nogueira X., Khelladi S., Krimi A., Colominas I., (2018) A very accurate Arbitrary Lagrangian–Eulerian meshless method for Computational Aeroacoustics - ) Computer Methods in Applied Mechanics and Engineering, 342, 116-141

Krimi A., Khelladi S., Nogueira X., Deligant M., Ata R., Rezoug M., (2018) Multiphase smoothed particle hydrodynamics approach for modeling soil–water interactions - Advances in Water Resources, 121, 189-205

Sodjavi K., Ravelet F., Bakir F., (2018) Effects of axial rectangular groove on turbulent Taylor-Couette flow from analysis of experimental data - Experimental Thermal and Fluid Science, 97, 270-278

Ravelet F., Bakir F., Sarraf C., Wang J., (2018) Experimental investigation on the effect of load distribution on the performances of a counter-rotating axial-flow fan - Experimental Thermal and Fluid Science, 96, 101-110

Zuo P., Benevides R.C., Laribi M.A., Fitoussi J., Shirinbayan M., Bakir F., Tcharkhtchi A., (2018) Multi-scale analysis of the effect of loading conditions on monotonic and fatigue behavior of a glass fiber reinforced polyphenylene sulfide (PPS) composite - Composites Part B: Engineering, 145, 173-181

Specklin M., Delauré Y., (2018) A sharp immersed boundary method based on penalization and its application to moving boundaries and turbulent rotating flows - European Journal of Mechanics, B/Fluids, 70, 130-147

Ramírez L., Nogueira X., Ouro P., Navarrina F., Khelladi S., Colominas I., (2018) A Higher-Order Chimera Method for Finite Volume Schemes - Archives of Computational Methods in Engineering, 25(3), 691-706

Krimi A., Rezoug M., Khelladi S., Nogueira X., Deligant M., Ramírez L., (2018) Smoothed Particle Hydrodynamics: A consistent model for interfacial multiphase fluid flow simulations - Journal of Computational Physics, 358, 53-87

Abbasnezhad N., Khavandi A., Fitoussi J., Arabi H., Shirinbayan M., Tcharkhtchi A., (2018) Influence of loading conditions on the overall mechanical behavior of polyether- ether-ketone (PEEK) - International Journal of Fatigue, 109, 83-92

Ait Chikh M.A., Belaidi I., Khelladi S., Paris J., Deligant M., Bakir F., (2018) Efficiency of bio- and socio-inspired optimization algorithms for axial turbomachinery design - Applied Soft Computing Journal, 64, 282-306

Ramoul S., Fourar A., Massouh F., (2018) Numerical modeling of unstable flows in conducts with variable geometry - UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(3), 231- 242

Paul Tamayo-Serrano, Samir Garbaya et Pierre Blazevic, (2018) Gamified In-Home Rehabilitation for Stroke Survivors: Analytical Review - the International Journal of Serious Games - ISSN: 2384-8766 , 5(1),

M. Specklin, (2018) A versatile immersed boundary method for pump design - Sulzer Technical Review, 100,

H. Jamshidifarsani, P. Tamayo-Serrano, S. Garbaya, T. Lim, P. Blazevic, (2018) Integrating Self-Determination and Self-Efficacy in Game Design - Lecture Notes in Computer Science, 11385,

Specklin M., Delaure Y., (2018) A sharp immersed boundary method based on penalisation and its application to moving boundaries and turbulent rotating flows - European Journal of Mechanics – B/Fluids, 70 (2018), 130-147, https://doi.org/10.1016/j.euromechflu.2018.03.003

Driss SLIMANI, Bachir ELKIHEL, Georges DESCOMBES, Christelle PERILHON, (2018) Design and experimental investigation of a dryer with two types of combined solar concentrators using two natural heat transfer fluids - International Journal of Engineering and Technology (IJET), Vol 10 , 326-335

N. Abbasnezhad, A. Khavandi, J. Fitoussi, H. Arabi, M. Shirinbayan et A. Tcharkhtchi, (2018) Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK) - International Journal of Fatigue, 109, 83-92

A. Krimi, M. Rezoug, S. Khelladi, X. Nogueira, M. Deligant et L. Ramírez, (2018) Smoothed Particle Hydrodynamics : A consistent model for interfacial multiphase fluid flow simulations - Journal of Computational Physics, 358, 53-87

C. Sarraf et J.-P. Damion, (2018) Dynamic pressure sensitivity determination with Mach number method - Measurement Science and Technology, 29, 054006

S. Saxholm, R. Högström, C. Sarraf, G. Sutton, R. Wynands, F. Arrhén, G. Jönsson, Y. Durgut, A. Peruzzi, A. Fateev, M. Liverts, C. Adolfse et A. Oster, (2018) Development of measurement and calibration techniques for dynamic pressures and temperatures (DynPT) : Background and objectives of the 17IND07 DynPT project in the European Metrology Programme for Innovation and Research (EMPIR) - Journal of Physics : Conference Series, 1065, 162015

Panayotov F., Dobrev I., Massouh F., Todorov M., (2017) Influence of the number of vortex elements on the stability and accuracy of the numerical simulation for a rotor in hover - Review of the Air Force Academy , 3 (35), 27-36

Shirinbayan M., Fitoussi J., Abbasnezhad N., Meraghni F., Surowiec B., Tcharkhtchi A., (2017) Mechanical characterization of a Low Density Sheet Molding Compound (LD-SMC): Multi-scale damage analysis and strain rate effect - Composites Part B: Engineering, 131, 8-20

Aldhaidhawi M., Chiriac R., Bădescu V., Descombes G., Podevin P., (2017) Investigation on the mixture formation, combustion characteristics and performance of a Diesel engine fueled with Diesel, Biodiesel B20 and hydrogen addition - International Journal of Hydrogen Energy, 42 (26), 16793-16807, doi: 10.1016/j.ijhydene.2017.01.222

Shirinbayan M., Fitoussi J., Bocquet M., Meraghni F., Surowiec B., Tcharkhtchi A., (2017) Multi-scale experimental investigation of the viscous nature of damage in Advanced Sheet Molding Compound (A-SMC) submitted to high strain rates - Composites Part B: Engineering, 115, 3-13

Cognet V., Courrech Du Pont S., Dobrev I., Massouh F., Thiria B., (2017) Bioinspired turbine blades offer new perspectives for wind energy - Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473 (2198), 570-577

Azzam T., Paridaens R., Ravelet F., Khelladi S., Oualli H., Bakir F., (2017) Experimental investigation of an actively controlled automotive cooling fan using steady air injection in the leakage gap - Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 231 (1), 59-67

Shirinbayan M., Fitoussi J., Meraghni F., Surowiec B., Laribi M., Tcharkhtchi A., (2017) Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC) - ) Journal of Reinforced Plastics and Composites, 36 (4), 271-282

Meghlaoui I., Dobrev I., Massouh F., Benretem A.O. Khalfa, D., (2017) Computationally inexpensive free vortex method to obtain vortex core position in the wake of a horizontal axis wind turbine - International Journal of Fluid Mechanics Research, 44 (5), 427-443

Ramoul S., Fourar A., Massouh F., (2017) Numerical modeling of transient flows in load pipes with complex geometry - Journal of Applied Mathematics and Computational Mechanics , 16(4), 67-78

Barkat I., Benretem A., Massouh F., Chebel A., (2017) Modeling and simulation of wind data for a prediction of the electrical energy from wind farms: case of a site in the region of Annaba - Applied Journal of Environmental Engineering Science, ISSN 2509-2065, 159-168

Merrouchi, F., Fourar, A., Massouh, F., Haddad, D., Azoui, H., (2017) The influence of obstacles and suspended matter on the distribution of turbulent flow velocities in a lamella separator - Journal of New Technology and Materials, 7(01), 53-63

Bassila J., Toubassy J., Clodic D., Danlos A., (2017) Energy and Exergy Analysis for Low-Temperature Refrigeration System for Biogas Upgrading - Journal of Energy and Power Engineering, 11(2017), doi: 10.17265/1934-8975/2017.01.002

Keryakos, E., Toubassy J., Clodic D., Descombes G., (2017) Frost growth investigation and temperature glide refrigerants in a fin-and-tube heat exchanger - International Journal of Air conditioning and Refrigeration, 2017, 25(1), doi: 10.1142/S2010132517500092

Dobrev I., Massouh F. , (2016) Development of near wake of a HAWT depending on hub height - Springer Proceedings in Physics, 185, 573-580

A. Hamidi, S. Khelladi, A. illoul, M. Shirinbayan, F. Bakir, A. Tcharkhtchi, (2016) Implementation of surface tension force in fluid flow during reactive rotational molding - International Journal of Material Forming, 9(2), 131-148

A. Hamidi, S. Khelladi, A. illoul, M. Shirinbayan, F. Bakir, A. Tcharkhtchi, , (2016) Modeling Surface Tension with Smoothed Particle Hydrodynamics in Reactive Rotational Moulding - Computers & Fluids, 118, 191-203

Paridaens R., Kouidri S., Jerbi F.J., (2016) Time-averaged second-order pressure and velocity measurements in a pressurized oscillating flow prime mover - Journal of Mechanical Science and Technology, 30(11), 4971-4978

Noura B., Dobrev I., Khelladi S., Massouh F, (2016) 3D unsteady flow analysis around a rotor blade of horizontal axis wind turbine-Rutland 503 - International Journal of Energy and Statistics, 4(03), DOI: 10.1142/S2335680416500137

Cherabi B., Hamrani A., Belaidi I., Khelladi S., Bakir F., (2016) An efficient reduced-order method with PGD for solving journal bearing hydrodynamic - Comptes Rendus - Mecanique, 344(10), 689-714

Hamidi A., Farzaneh S., Nony F., Ortega Z., Khelladi S., Monzon M., Bakir F., Tcharkhtchi A., (2016) Modelling of sintering during rotational moulding of the thermoplastic polymers - International Journal of Material Forming, 9(4), 519-530

Clenci A., Niculescu R., Danlos A., Iorga-Simăn V., Trică A., (2016) Impact of biodiesel blends and Di-Ethyl-Ether on the cold starting performance of a compression ignition engine - Energies, 9(4), 284-303, https://doi:10.3390/en9040284

Zouaoui S., Djebouri H., Mohammedi K., Khelladi S., Ait Aider A., (2016) Experimental study on the effects of big particles physical characteristics on the hydraulic transport inside a horizontal pipe - Chinese Journal of Chemical Engineering, 24(2), 317-322

Noura B., Dobrev I., Kerfah R., Massouh F., Khelladi S., (2016) Investigation of the rotor wake of horizontal axis wind turbine under yawed condition - Journal of Applied Fluid Mechanics, 9(6), 2695-2705

Punov P., Lacour S., Périlhon C., Podevin P., Descombes G., Evtimov T., (2016) Numerical study of the waste heat recovery potential of the exhaust gases from a tractor engine - Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230(1), 37-48, doi: 10.1177/0954407015577530

Nogueira X., Ramírez L., Khelladi S., Chassaing J.-C., Colominas I., (2016) A high-order density-based finite volume method for the computation of all-speed flows - Computer Methods in Applied Mechanics and Engineering, 298, 229-251

Tomov P., Khelladi S., Ravelet F., Sarraf C., Bakir F., Vertenoeuil P., (2016) Experimental study of aerated cavitation in a horizontal venturi nozzle - Experimental Thermal and Fluid Science, 70, 85-95

Nehla Ghouaiel, Samir Garbaya, Jean-Marc Cieutat et Jean-Pierre Jessel, (2016) Mobile Augmented Reality in Museums: Towards Enhancing Visitor’s Learning Experience - The International Journal of Virtual Reality, 17(01), 21-31

Cherabi B., Hamrani A., Belaidi I., Khelladi S., Bakir F., (2016) An efficient reduced-order method with PGD for solving journal bearing hydrodynamic lubrication problems - Comptes Rendus - Mecanique, 344(10), 689-714

Punov P., Evtimov T., Chiriac R., Clenci A., Danel Q., Descombes G., (2016) Progress in high performance, low emissions, and exergy recovery in internal combustion engines - Int. J. Energy Res., doi: 10.1002/er.3666

M. Shirinbayan, A. Shafyei‚ M. R. Aboutalebi, (2015) Kinetics of Vanadium Carbide Coating Produced on AISI D2 Steel by Thermoreactive Diffusion Technique - Russian Journal of Applied Chemistry, 88(1), 160-168

A. Tcharkhtchi, S. A. Elhirtsi, K. Ebrahimi, J. Fitoussi, M. Shirinbayan, S. Farzaneh, (2015) Some New Concepts of Shape Memory Effect of Polymers - Polymers, 6(4), 1144-1163

Shirinbayan M., Fitoussi J., Meraghni F., Surowiec B., Bocquet M., Tcharkhtchi A, (2015) High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A- SMC) under tension - Composites Part B: Engineering, 82, art. no. 3670, 30-41

Ramírez L., Foulquié C., Nogueira X., Khelladi S., Chassaing J.-C., Colominas I, (2015) New high-resolution-preserving sliding mesh techniques for higher-order finite volume schemes - Computers and Fluids, 118, 114-130

Hamidi A., Khelladi S., Illoul L., Shirinbayan M., Bakir F., Tcharkhtchi A., (2015) Modelling surface tension with smoothed particle hydrodynamics in reactive rotational moulding - Computers and Fluids, 118, 191-203

Chabi F., Champmartin S., Sarraf C., Noguera R., (2015) Critical evaluation of three hemodynamic models for the numerical simulation of intra-stent flows - Journal of Biomechanics, 48 (10), 1769-1776

Deligant M., Specklin M., Khelladi S., (2015) A naturally anti-diffusive compressible two phases Kapila model with boundedness preservation coupled to a high order finite volume solver - Computers and Fluids, 114, 265-273,http://dx.doi.org/10.1016/j.compfluid.2015.03.004

Campos-Amezcua R., Bakir F., Campos-Amezcua A., Khelladi S., Palacios-Gallegos M., Rey R. , (2015) Numerical analysis of unsteady cavitating flow in an axial inducer - Applied Thermal Engineering, 75, 1302-1310

Maurel B., Sarraf C., Bakir F., Chai F., Maton M., Sobocinski J., Hertault A., Blanchemain N., Haulon S., Lermusiaux P. A , (2015) New Hemodynamic Ex Vivo Model for Medical Devices Assessment - Annals of Vascular Surgery, 29 (8), 1648-1655

P. Tomov, A. Danlos, S. Khelladi, F. Ravelet, Ch. Sarraf, F. Bakir, (2015) POD study of aerated cavitation in a venturi nozzle - J. Phys. Conf. Ser., 656, 012171

Juan Wang, Florent Ravelet, Farid Bakir , (2015) Performance gains provided by the use of a counter-rotating axial-flow fan with respect to a conventional rotor-stator stage - Journal of Power Sources, Elsevier, 2 (4), 9

Chabi F., Champmartin S., Sarraf C., Noguera R., (2015) Critical evaluation of three hemodynamic models for the numerical simulation of intra-stent flows ( - Journal of Biomechanics, 48(10), 1769-1776

Adrian Clenci, Vasile Hara, Nicolae Doru Stanescu, Adrian Biziiac, Rodica Niculescu, (2015) Analytical synthesis and computer aided kinematic analysis of a continuously variable valve lift mechanism - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 231, p. 202-217; Published: DEC 7, 2015. doi: 10.1177/0954406215620686

Massouh F., Dobrev I. , (2014) Investigation of wind turbine flow and wake, Journal of Fluid Science and Technology - Bull. of the JSME, 9 (3), DOI: 10.1299/jfst.2014jfst0025

L. Ramírez, X. Nogueira, S. Khelladi, J.-C. Chassaing, I. Colominas, (2014) A new higher-order finite volume method based on Moving Least Squares for the resolution of the incompressible Navier–Stokes equations on unstructured grids - Computer Methods in Applied Mechanics and Engineering, 278, 883–901

Danlos, A., Ravelet, F., Coutier-Delgosha, O., Bakir, F. , (2014) Cavitation regime detection through Proper Orthogonal Decomposition: Dynamics analysis of the sheet cavity on a grooved convergent-divergent nozzle - International Journal of Heat and Fluid Flow, 47, 9-20

Nouri H., Ravelet F., Bakir F., (2014) Experimental study of the flow and the interaction in-between two counter-rotating subsonic axial-flow fans [Étude expérimentale de l'écoulement et de l'interaction entre deux rotors contrarotatifs subsoniques] - Houille Blanche, 3, 85-95

Danlos A., Mehal J.E., Ravelet F., Coutier-Delgosha O., Bakir F., (2014) Study of the cavitating instability on a grooved venturi profile - Journal of Fluids Engineering, Transactions of the ASME, 136 (10), DOI: 10.1115/1.4027472

Brice Saint-Michel, Bérengère Dubrulle, Louis Marié, Florent Ravelet, François Daviaud , (2014) Influence of Reynolds number and forcing type in a turbulent von Karman flow - New Journal of Physics, Institute of Physics : Open Access Journals, 16, 063037

Germanico Gonzalez-Badillo, Hugo Medellin-Castillo, Theodore Lim, James Ritchie, Samir Garbaya, (2014) The development of a physics and constraint-based haptic virtual assembly system - Assembly Automation, 34(1), 41 - 55

Germanico Gonzalez-Badillo, Hugo I. Medellin-Castillo, Theodore Lim, James M. Ritchie, Raymond C.W. Sung, Samir Garbaya, (2014) A new methodology to evaluate the performance of physics simulation engines in haptic virtual assembly - Assembly Automation, 34(2), 128 - 140

Samir Garbaya, Chekra MIRAOUI, Robert WENDRICH, Theodore LIM, Ioana Andreea STĂNESCU, and Jannicke Baalsrud HAUGE, (2014) Sensorial Virtualization: Coupling Gaming and Virtual Environment - Journal of Advanced Distributed Learning Technology (JADLET), 2(5),